The effect of semi-solid processing parameters on microstructure in Al-7wt.%Si alloy

Basit Öğe Kaydı
dc.contributor.authorÖzyürek, D.
dc.date.accessioned2024-09-29T16:16:01Z
dc.date.available2024-09-29T16:16:01Z
dc.date.issued2011
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn the present work, the effect of temperature and pressing time on the microstructure of a Al-7wt.%Si alloy was studied. Al-Si specimens were prepared by pre-shaping powder obtained with mechanical processing from Al-7wt.%Si alloy produced with ingot metallurgy under 800 MPa pressure. The prepared specimens were subjected to semi-solid processing at 100 MPa pressure and at different temperatures (580, 590 and 600°C) for various pressing durations (1 and 2 min). The specimens produced with semi-solid processing were analysed with optical and scanning electron microscope (SEM) and energy dispersive spectroscope (EDS). The results indicated that grain growth increased with the increasing temperature. Fine global grains were obtained at 590°C for 2-min pressing time. © 2011 Academic Journals.en_US
dc.identifier.doi10.5897/SRE11.1751
dc.identifier.endpage6226en_US
dc.identifier.issn1992-2248
dc.identifier.issue29en_US
dc.identifier.scopus2-s2.0-84858170407en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage6222en_US
dc.identifier.urihttps://doi.org/10.5897/SRE11.1751
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8781
dc.identifier.volume6en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofScientific Research and Essaysen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAl-Si alloyen_US
dc.subjectMicrostructureen_US
dc.subjectSemi-solid parametersen_US
dc.titleThe effect of semi-solid processing parameters on microstructure in Al-7wt.%Si alloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu