Vacuum heat-treatment of MgO-densified silicon nitride ceramics and their compatibility with molten aluminium and copper
Küçük Resim Yok
Tarih
2011
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Sci Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Silicon nitride with 3% MgO powder mix was compacted with cold isostatic pressing followed by uniaxial pressing. Pressureless sintering of the compacted silicon nitride (Si3N4) crucibles was at 1600 degrees C for 30 min in the carbon furnace. The densities achieved after this process are 3140 kg/m(3). One of these crucibles was vacuum heat treated at 1575 degrees C for 5 h to remove grain boundary glass. Both this crucible and the as-sintered crucibles were used for melting aluminium and copper by heating in, air atmospheres to 700 degrees C and 1100 degrees, respectively. Vacuum heat-treated glass free ceramic crucible was successfully used for the molten aluminium and copper handling. On the other hand, the chemical bond occurred for as sintered Si3N4 crucible. No adherence was observed after examining of interface between Al and the heat-treated ceramic crucible with SEM and EDX analysis. (c) 2010 Published by Elsevier Ltd and Techna Group S.r.l.
Açıklama
Anahtar Kelimeler
Silicon nitride ceramics, Vacuum heat treatment, Crucible, Molten metal handling
Kaynak
Ceramics International
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
37
Sayı
3