Determination of the effects of wood types and impregnation process in performance of the window frames corner joints

Basit Öğe Kaydı
dc.contributor.authorAltinok, M.
dc.contributor.authorDoruk, S.
dc.contributor.authorArslan, A.R.
dc.contributor.authorGürleyen, L.
dc.date.accessioned2024-09-29T16:22:08Z
dc.date.available2024-09-29T16:22:08Z
dc.date.issued2013
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study examines the effects of wood types and impregnation (procedure types and process time) in performance of window frames corner joint with double tenon. For this purpose, "L corner joint" type samples (number 120) were manufactured by using Scotch pine (Pinus sylvestris Lipsky), oak (Quercus petreaea Lipsky) and black locust (Robinia pseudoacacia L.). Polyvinyl acetate based (two kompenant-D4) adhesive were used to bond tenon and mortise corner joints. The samples were impregnated by using the method of immersion for 20 and 40 min with mixture of wax/linseed oil (3 % paraffin, 10 % linseed oil, 87 % white spirit) and imersol aqua. The diagonal compression test was applied to test samples (determine performance of the window frames corner joint) according to ASTM-D 143-83 1983 standards. Finally, the highest diagonal compression performance was obtained on black locust samples (7480.016 N) with the immersol aqua impregnated for 40 min. The lowest diagonal compression performance was received on oak samples (2572.706 N) which were impregnated in white mixture of wax/linseed oil for 40 min.en_US
dc.identifier.endpage284en_US
dc.identifier.issn1336-4561
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-84881110390en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage275en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9846
dc.identifier.volume58en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofWood Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCorner jointen_US
dc.subjectDiagonal pressureen_US
dc.subjectDiagonal strengthen_US
dc.subjectImersol aquaen_US
dc.subjectParaffinen_US
dc.subjectPerformanceen_US
dc.subjectTenon and mortiseen_US
dc.subjectWindow framesen_US
dc.titleDetermination of the effects of wood types and impregnation process in performance of the window frames corner jointsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu