Metallurgical and corrosion properties of explosively welded Ti6Al4V/low carbon steel clad
Küçük Resim Yok
Tarih
2005
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Journal Mater Sci Technol
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Titanium alloy (Ti6Al4V) and low carbon steel (LCS) were joined by explosive welding method using different ratios of explosive. Some metallurgical properties of joined samples were investigated. Joined samples were examined by means of optical microscope, scanning electron microscope (SEM) and tensile-shearing tests. Bending, tensile, hardness and corrosion behaviour of the samples were investigated. Separation was not occurred on the joining interface after tensile-shearing and bending tests. It is seen that hardness of both plates were increased with increasing explosive. It is found that increasing explosive ratio leads to an increase in corrosion. It is also found that corrosion rate was high at the beginning of the experiment but the rate of the corrosion decreased subsequently during the experiment.
Açıklama
Anahtar Kelimeler
explosive welding, joining, corrosion, Ti6Al4V, low carbon steel
Kaynak
Journal of Materials Science & Technology
WoS Q Değeri
Q4
Scopus Q Değeri
Cilt
21
Sayı
5