THREE-DIMENSIONAL NUMERICAL INVESTIGATION OF TURBULENT FLOW AND HEAT TRANSFER INSIDE A HORIZONTAL SEMI-CIRCULAR CROSS-SECTIONED DUCT

Küçük Resim Yok

Tarih

2014

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Vinca Inst Nuclear Sci

Erişim Hakkı

info:eu-repo/semantics/openAccess

Özet

In this study, steady-state turbulent forced flow and heat transfer in a horizontal smooth semi-circular cross-sectioned duct was numerically investigated. The study was carried out in the turbulentflow condition where Reynolds numbers range from 1.10(4) to 5.5.10(4). Flow is hydrodynamically and thermally developing (simultaneously developing flow) under uniform surface heat flux with uniform peripheral wall heat flux (H2) boundary condition on the duct's wall. A commercial CFD program, ANSYS Fluent 12.1, with different turbulent models was used to carry out the numerical study. Different suitable turbulence models for fully turbulent flow (k-epsilon Standard, k-epsilon Realizable, k-epsilon RNG, k-omega Standard, and k-omega SST) were used in this study. The results have shown that as the Reynolds number increases Nusselt number increases but Darcy friction factor decreases. Based on the present numerical solutions, new engineering correlations were presented for the average Nusselt number and average Darcy friction factor. The numerical results for different turbulence models were compared with each other and similar experimental investigations carried out in the literature. It is obtained that, k-epsilon Standard, k-epsilon Realizable, and k-epsilon RNG turbulence models are the most suitable turbulence models for this investigation. Isovel contours of velocity magnitude and temperature distribution for different Reynolds numbers, turbulence models and axial stations in the duct were presented graphically. Also, local heat transfer coefficient and local Darcy friction factor as function of dimensionless position along the duct were obtained in this investigation.

Açıklama

Anahtar Kelimeler

simultaneously developing flow, forced convection, friction factor, semi-circular cross-sectioned duct, heat transfer coefficient, turbulent flow, ANSYS Fluent

Kaynak

Thermal Science

WoS Q Değeri

Q2

Scopus Q Değeri

Q3

Cilt

18

Sayı

4

Künye