Demirsöz, Recep2024-09-292024-09-2920222149-4916https://doi.org/10.30855/gmbd.2022.01.08https://search.trdizin.gov.tr/tr/yayin/detay/514733https://hdl.handle.net/20.500.14619/10893In this study, using variables such as load and sliding speed, which are effective parameters on abrasive wear, the amount of wear on the bearing material, friction coefficients, and trace depth values according to the experimental conditions were determined. According to the results of the analysis of variance performed as a result of the experiments carried out in the ball-on-flat experimental setup, the most effective parameter for all outputs was the load value, and the effect ratio for mass loss was 66.26%, the effect ratio for the friction coefficient was 53.02% and the effect ratio for the trace depth was 85.69%. The R2 values obtained from the comparison of the experimental results with the regression results were found to be 0.9750, 0.9988, and 0.9759 for mass loss, friction coefficient, and trace depth, respectively. These results show that the regression model fit is good.eninfo:eu-repo/semantics/openAccessArticle10.30855/gmbd.2022.01.081021895147338