Erer, Ahmet MustafaOguz, Serkan2024-09-292024-09-2920200954-09111758-6836https://doi.org/10.1108/SSMT-08-2018-0028https://hdl.handle.net/20.500.14619/6086Purpose This paper aims to invastigate of the wetting and interfacial properties of Sn-(3-x)Ag-0.5Cu-(x)Bi (x = 0.5, 1 and 2 in Wt.%) Pb-free solder alloys at various temperatures ( 250, 280 and 310 degrees C) on Cu substrate in Ar atmosphere. Design/methodology/approach In this study, new Sn-(3-x)Ag-0.5Cu-xBi systems, low Ag content quaternary lead-free solder alloys, were produced by adding 0.5, 1 and 2% Bi to the near-eutectic SAC305 alloy. The wetting angles of three new alloys, Sn-2.5Ag-0.5Cu-0.5 Bi(SAC-0.5 Bi), Sn-2Ag-0.5Cu-1Bi(SAC-1Bi) and Sn-1Ag-0.5Cu-2Bi(SAC-2Bi) were measured by sessile drop technique on the Cu substrate in argon atmosphere. Findings In accordance with the interfacial analyses, intermetallic compounds of Cu3Sn, Cu6Sn5, and Ag3Sn were detected at the SAC-Bi/Cu interface. The results of wetting tests show that the addition of 1 Wt.% Bi improves the wetting properties of the Sn-3Ag-0.5Cu solder. The lowest wetting angle (theta) was obtained as 35,34 degrees for Sn-2Ag-0.5Cu-1Bi alloy at a temperature of 310 degrees C. Originality/value This work was carried out with our handmade experiment set and the production of the quaternary lead-free solder alloy used in wetting tests belongs to us. Experiments were conducted using the sessile drop method in accordance with wetting tests.eninfo:eu-repo/semantics/closedAccessContact angleWettabilityIMC'sPb-free solder alloyArticle10.1108/SSMT-08-2018-00282-s2.0-85073957712231Q21932WOS:000507117100003Q3