Tasliyan, A.Acarer, M.Seker, U.Gökkaya, H.Demir, B.2024-09-292024-09-2920071300-1884https://hdl.handle.net/20.500.14619/10019In this study, the effects of cutting parameters such as cutting speed, feed rate and cutting depth over cutting forces have been investigated. For this purpose, nickel based super alloy Inconel 718 has been processed with ceramic cutting tool having 1.2 mm insert radia on a digitally controlled turning lathe (CNC) without using cooling water. Different cutting processes having the values of five different cutting speeds (225, 300, 350, 400, 500 m/dak) and five different feed rates (0.05, 0.075, 0.1, 0.125, 0.15 mm/rev) and two different cutting depths (1mm, 2mm) have been implemented. In the experiments, the lowest main cutting force was obtained as (A-1-V) 192 N in 500 m/min cutting speed, 0.05 mm/rev feed rate speed and 1 mm depth of cut, the highest main cutting force was obtained as (B-5-I) 780 N in 225 m/min cutting speed, 0.15 mm/rev feed rate speed and 2 mm depth of cut.trinfo:eu-repo/semantics/closedAccessCeramic cutting toolsCutting parametersMain cutting forceProcessingArticle2-s2.0-3394772584351Q2122