Yazar "Budakci, Mehmet" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
  • Küçük Resim Yok
    Öğe
    The color changes on varnish layers after accelerated aging through the hot and cold-check test
    (Academic Journals, 2010) Budakci, Mehmet; Korkut, Derya Sevim; Esen, Rasit
    The purpose of this paper is to determine the color changes of cellulosic, polyurethane and acrylic varnish layers which were applied on the surfaces of Scots pine (Pinus sylvestris L.), Eastern beech (Fagus orientalis L.) and sessile oak (Quercus petraea L.) wood material after accelerated aging effects through the hot and cold-check test. For this purpose, test samples were firstly kept at 50 +/- 5 degrees C temperature for 1 h, and then conditioned for 1 h in a conditioning room, later moved to -20 +/- 2 degrees C temperature keeping for 1 h according to ASTM D1211-97 standard. These processes were accepted as 1 cycle and tests were continued to 20 cycles. Then the color changes were determined by using Minolta CR-231 device of tristimulus colorimeter according to ASTM D2244-07e1 standard. It was found that most color change was determined in cellulosic, polyurethane and acrylic varnish layers on the surfaces of Scots pine (Pinus sylvestris L.), Eastern beech (F. orientalis L.) and sessile oak (Q. petraea L.) wood material. The endurance of the protective coating (such as paint and varnish) to external effects is limited and the lifetime of the coating is determined by the type and the severity of the effects to which it is exposed. The effect of a color change on varnish layers can determine the usefulness of the varnish. It is conjectured that especially for the manufacturers and consumers in the furniture and decoration sector, the data obtained in this study will contribute to the making up of deficiencies in the understanding of the subject.
  • Küçük Resim Yok
    Öğe
    Effects of application methods and species of wood on color changes of varnishes
    (Academic Journals, 2009) Budakci, Mehmet; Ozcifci, Ayhan; Cinar, Hamza; Sonmez, Abdullah
    In this study, the color effects of wood materials to coloring with different application methods (brush, roller sponge and spray gun) and waterborne varnishes were investigated according to ASTM-D 2244. For this purpose, the experimental samples of Scots pine (Pinus silvestris L.), oriental beech (Fagus orientalis L.) and oak (Quercus petreae L.), which are commonly used woods in the carpentry and furniture industry in Turkey, were prepared and varnished with one and two-pack waterborne varnishes in accordance with ASTM D 3023. According to the result of the research, significant color changes in coloring as red and yellow tones on the sample surfaces of varnished wood materials were found. The highest color change was obtained in the samples of oak, when varnished with brush and spray gun while the lowest value was obtained in roller sponge in respect to the application methods for waterborne varnishes. However, the application method of spray gun for self crosslinked polyurethane, topcoat-clear, (SCPt) gave the highest metric chroma value among the three different application methods.