Yazar "Gökdag, M." seçeneğine göre listele

Listeleniyor 1 - 2 / 2
  • Küçük Resim Yok
    Öğe
    Modulated Model Predictive Torque Control for Interior Permanent Magnet Synchronous Machines
    (TUBITAK, 2022) Körpe, U.U.; Gökdag, M.; Koç, M.; Gülbüdak, O.
    Thanks to the advancements in the processor industry, the popularity in the industrial applications of Finite control set model predictive control (FCS-MPC) is increasing. FCS-MPC has several advantages, such as high closed-loop bandwidth, the inclusion of the control constraints, and nonlinearities. However, the control signals are directly produced by the predictive controller since no modulator is used. Hence, the system has non-fixed switching frequency, and the maximum achievable switching frequency is limited by the half of the sampling frequency. However, the control goals may suffer from the undesired ripples in case of a noticeable low switching frequency. To eliminate these ripples the sampling period of the system can be reduced. But this increases the computational burden on the processor. To overcome the unwanted oscillations in the control variables and decrease the computational burden on the processor, a modulated model predictive control (M2PC) strategy is proposed in this paper. The M2PC combines the space vector pulse width modulator (SVPWM) and FCS-MPC. Torque of the interior permanent magnet synchronous motor (IPMSM) is controlled with M2PC method. The motor is controlled in a constant torque region with the combination of the M2PC method and maximum torque per ampere (MTPA) control strategy. The comparative results of the conventional MPC method and M2PC method are reported in the paper and the superiority of the M2PC strategy is validated by simulation works. The results demonstrate that the M2PC method significantly reduces total harmonic distortion (THD) in stator currents. Based on the results, the M2PC method provides a better control performance for IPMSMs with significantly reduced torque ripples. © 2022, TUBITAK. All rights reserved.
  • Küçük Resim Yok
    Öğe
    Performance evaluation of model predictive control method for neutral point clamped inverter
    (Murat Yakar, 2022) Gülbudak, O.; Gökdag, M.
    The neutral-point clamped (NPC) inverter is a popular three-level converter topology used in motor drive applications and other dc/ac converter systems. In this paper, the performance evaluation of the model predictive control is performed to investigate its applicability in controlling NPC inverters. The model predictive control (MPC) is a promising closed-loop control strategy in applications where multiple control goals are considered. The ease of adding the objectives to the control law improves the reputation of the MPC. The numerous control goals can be regulated in single feedback. Thus, the adequate bandwidth is noticeably higher compared to the traditional linear controllers. However, controlling the multiple objectives require the use of weighting factors to tune the system performance. Regarding the system performance, multiple reference tracking performance is investigated in this study. Our case study considers three control goals: output load current, switching frequency control, and capacitor voltage balancing. The predictive control is designed to regulate these dynamics, and comprehensive performance analyses are performed. The designed controller is tested using a simulation tool. The simulation results prove that predictive control offers an excellent multi-objective control performance provided that the weighting factors and other design parameters are finely adjusted. The poor selection of the design parameters affects the closedloop performance, and the conducted analyses show the effects of the controller parameters. © Author(s) 2022.