Yazar "Hamzah, Hairul Hisham" seçeneğine göre listele

Listeleniyor 1 - 4 / 4
  • Küçük Resim Yok
    Öğe
    Effect of Supporting Background Electrolytes on the Nanostructure Morphologies and Electrochemical Behaviors of Electrodeposited Gold Nanoparticles on Glassy Carbon Electrode Surfaces
    (Amer Chemical Soc, 2021) Zakaria, Nor Dyana; Omar, Muhamad Huzaifah; Kamal, Najahtul Najihah Ahmad; Razak, Khairunisak Abdul; Soenmez, Turgut; Balakrishnan, Venugopal; Hamzah, Hairul Hisham
    Electrodeposition is an electrochemical method employed to deposit stable and robust gold nanoparticles (AuNPs) on electrode surfaces for creating chemically modified electrodes (CMEs). The use of several electrodeposition techniques with different experimental parameters allow in obtaining various surface morphologies of AuNPs deposited on the electrode surface. By considering the electrodeposition of AuNPs in various background electrolytes could play an important strategy in finding the most suitable formation of the electrodeposited AuNP films on the electrode surface. This is because different electrode roughnesses can have different effects on the electrochemical activities of the modified electrodes. Thus, in this study, the electrodeposition of AuNPs onto the glassy carbon (GC) electrode surfaces in various aqueous neutral and acidic electrolytes was achieved by using the cyclic voltammetry (CV) technique with no adjustable CV parameters. Then, surface morphologies and electrochemical activities of the electrodeposited AuNPs were investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM), CV, and electrochemical impedance spectroscopy (EIS). The obtained SEM and 3D-AFM images show that AuNPs deposited at the GC electrode prepared in NaNO3 solution form a significantly better, uniform, and homogeneous electrodeposited AuNP film on the GC electrode surface with nanoparticle sizes ranging from similar to 36 to 60 nm. Meanwhile, from the electrochemical performances of the AuNP-modified GC electrodes, characterized by using a mixture of ferricyanide and ferrocyanide ions [Fe(CN6)(3-/4-)], there is no significant difference observed in the case of charge-transfer resistances (R-ct) and heterogeneous electron-transfer rate constants (k(o)), although there are differences in the surface morphologies of the electrodeposited AuNP films. Remarkably, the R-ct values of the AuNP-modified GC electrodes are lower than those of the bare GC electrode by 18-fold, as the R(ct )values were found to be similar to 6 Omega (p < 0.001, n = 3). This has resulted in obtaining k(o) values of AuNP-modified GC electrodes between the magnitude of 10(-2) and 10(-3) cm s(-1), giving a faster electron-transfer rate than that of the bare GC electrode (10(-4) cm s(-1)). This study confirms that using an appropriate supporting background electrolyte plays a critical role in preparing electrodeposited AuNP films. This approach could lead to nanostructures with a more densely, uniformly, and homogeneously electrodeposited AuNP film on the electrode surfaces, albeit utilizing an easy and simple preparation method.
  • Küçük Resim Yok
    Öğe
    Hexanediamine Monolayer Electrografted at Glassy Carbon Electrodes Enhances Oxygen Reduction Reaction in Aqueous Neutral Media
    (Electrochemical Soc Inc, 2020) Hamzah, Hairul Hisham; Kamal, Najahtul Najihah Ahmad; Meneghello, Marta; Shafiee, Saiful Arifin; Sonmez, Turgut; Taib, Mohamad Nurul Azmi Mohamad; Samsuri, Shazarizul Haziq Mohd
    This study presents for the first time the electrocatalytic behaviour of hexanediamine (HDA) monolayer electrografted at glassy carbon (GC) electrodes that enhanced oxygen reduction reaction (ORR) in aqueous neutral media. HDA modified GC electrodes gave a higher current density than platinum bare electrodes based on the cyclic voltammograms (CV), although a similar to 0.21 V vs. Ag/AgCl higher onset potential was observed at -0.1 mA cm(-2). Electrochemical impedance spectra (EIS) showed that the electrocatalytic reaction on HDA monolayer film towards dissolved oxygen molecules is controlled by diffusion and charge transfer processes. From the scan rate studies and the Laviron equation, it was found that the ORR on this modified electrode proceeded via a fast four-electrons transfer.
  • Küçük Resim Yok
    Öğe
    Mechanistic pathways and kinetic studies of oxygen reduction reaction (ORR) at Covalent Triazine Frameworks (CTFs)
    (Pergamon-Elsevier Science Ltd, 2024) Soenmez, Turgut; Uecker, Jan; Hamzah, Hairul Hisham; Palkovits, Regina
    Herein, four different metal-free nitrogen containing Covalent Triazine Frameworks (CTFs) based on their applied monomers (DCP, DCBP, mDCB and pDCB) are synthesized via a classical ionothermal synthesis route (ZnCl2, 400/600 degrees C). These materials are fully characterized and their electrochemical activities for ORR are tested and compared to each other including Carbon Super P and Pt black as standards in 0.1 M KOH. While DCP provides similar catalytic activity to Carbon Super P showing mostly a 2e- process (n=2.95) with high H2O2 formation of 52.6 %, the other three CTFs (DCBP, mDCB and pDCB) possess higher ORR activities, surprisingly even much higher limiting current densities than Pt black, proving that O2 is mainly reduced via direct 4epathway since n values are in the range of 3.52 to 3.62 and the detected H2O2 values are in the range of 19-23.9 %. Among the studied CTFs, mDCB reaches a limiting current density of -5.61 mA cm-2 (1.21 mA cm-2 larger than that for Pt black, -4.40 mA cm-2) with 0.11 V larger onset potential compared to Pt black. The significant electrochemical performances of the CTF materials in ORR via a 4e- process are correlated to the high specific surface areas (up to 2500 m2 g-1), large pore volumes (up to 2.05 cm3 g-1) and the largest total N-graphitic/ quaternary contents as well as micro-mesoporous structure properties.
  • Küçük Resim Yok
    Öğe
    Recycling Chocolate Aluminum Wrapping Foil as to Create Electrochemical Metal Strip Electrodes
    (Mdpi, 2021) Hamzah, Hairul Hisham; Saleh, Nur Hidayah; Patel, Bhavik Anil; Mahat, Mohd Muzamir; Shafiee, Saiful Arifin; Sonmez, Turgut
    The development of low-cost electrode devices from conductive materials has recently attracted considerable attention as a sustainable means to replace the existing commercially available electrodes. In this study, two different electrode surfaces (surfaces 1 and 2, denoted as S1 and S2) were fabricated from chocolate wrapping aluminum foils. Energy dispersive X-Ray (EDX) and field emission scanning electron microscopy (FESEM) were used to investigate the elemental composition and surface morphology of the prepared electrodes. Meanwhile, cyclic voltammetry (CV), chronoamperometry, electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV) were used to assess the electrical conductivities and the electrochemical activities of the prepared electrodes. It was found that the fabricated electrode strips, particularly the S1 electrode, showed good electrochemical responses and conductivity properties in phosphate buffer (PB) solutions. Interestingly, both of the electrodes can respond to the ruthenium hexamine (Ruhex) redox species. The fundamental results presented from this study indicate that this electrode material can be an inexpensive alternative for the electrode substrate. Overall, our findings indicate that electrodes made from chocolate wrapping materials have promise as electrochemical sensors and can be utilized in various applications.