An Investigation of Joinability of S235JR and S355JR Construction Steel by MAG Welding Method with Cored Wire Electrode
Küçük Resim Yok
Tarih
2018
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Gazi Univ
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In this study, S235JR and S355JR construction steel plates with 3 mm thickness both were joined using cored wire electrode type filler metal by MAG welding method. Joined materials between themselves (S235JR-S235JR, S355JR-S355JR) and different (S235JR-S355JR) were carried out in three different combinations including. Welding operations of these steels was carried out in 3 different combinations with each other (S235JR-S235JR, S355JR-S355JR) and with each other (S235JR-S355JR). The mechanical and microstructure properties of the welded samples were investigated. As a result of tensile tests, fracture occurred on main materials for S235JR-S235JR and S355JR-S355JR joints and occurred on S235JR side for S235JR-S355JR joints. No crack or separation was observed in all joined samples during 180 degrees bending tests in both directions. As a result of the microhardness tests, it was measured from the highest hardness weld metal in all joining combinations, followed by ITAB and main material. In the microstructure studies, it was determined that the whole of the samples came to the grain growth from the main material to the welding metal.
Açıklama
Anahtar Kelimeler
MAG welding, S235JR, S355JR, mechanical properties, microstructure
Kaynak
Journal of Polytechnic-Politeknik Dergisi
WoS Q Değeri
N/A
Scopus Q Değeri
Cilt
21
Sayı
3
