TECHNICAL NOTE: STATIC VERSUS CYCLIC LOAD CAPACITY OF SIDE CHAIRS CONSTRUCTED WITH MORTISE AND TENON JOINTS

Basit Öğe Kaydı
dc.authoridERDIL, YUSUF ZIYA/0000-0003-3938-2168
dc.contributor.authorLikos, Erkan
dc.contributor.authorHaviarova, Eva
dc.contributor.authorEckelman, Carl A.
dc.contributor.authorErdil, Yusuf Ziya
dc.contributor.authorOzcifci, Ayhan
dc.date.accessioned2024-09-29T16:11:19Z
dc.date.available2024-09-29T16:11:19Z
dc.date.issued2013
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe effect of cross-sectional tenon geometry on static and cyclic load capacity of side chairs constructed with round-, rectangular-, and diamond-shaped mortise and tenon joints was investigated. Cyclic load capacity averaged about two-thirds of static load capacity for the joint configurations tested. For the configurations included in the test, chairs with mortise and tenon joints constructed with round-, rectangular-, and diamond-shaped tenons had static load to cyclic passing load ratios of 56.5, 66.8, and 69.2% for rectangular-, round-, and diamond-shaped tenons, respectively. These results indicate that useful relationships existed between static and cyclic performance of round mortise and tenon joints, which may simplify the design process for chairs that must pass cyclic performance tests.en_US
dc.identifier.endpage227en_US
dc.identifier.issn0735-6161
dc.identifier.issue2en_US
dc.identifier.startpage223en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8331
dc.identifier.volume45en_US
dc.identifier.wosWOS:000318130100011en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherSoc Wood Sci Technolen_US
dc.relation.ispartofWood and Fiber Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectStatic chair performance testsen_US
dc.subjectcyclic chair performance testsen_US
dc.subjectmortise and tenon jointsen_US
dc.subjectAmerican Library Associationen_US
dc.titleTECHNICAL NOTE: STATIC VERSUS CYCLIC LOAD CAPACITY OF SIDE CHAIRS CONSTRUCTED WITH MORTISE AND TENON JOINTSen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu