BIO-OIL PRODUCTION FROM CATALYTIC PYROLYSIS METHOD OF FURNITURE INDUSTRY SAWDUST
Küçük Resim Yok
Tarih
2013
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Gazi Univ, Fac Engineering Architecture
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, scots pine (Pinus sylvestris L.) sawdust was used as biomass resources. Catalyzed and uncatalyzed (thermal) pyrolysis processes were conducted in a fixed-bed reactor. The effects of the parameters on pyrolysis product yields such as temperature and catalysis type were investigated. The pyrolysis of the experimental samples that have a particle size in the range of 0.850-1.60 mm were carried out at the temperatures of 400, 500 and 600 degrees C at the heating rate of 5 degrees C/min. Nitrogen gas (N-2) flow was used at the rate of 30 ml/min during the process. Basic salts such as Na2CO3, K2CO3 and Lewis acid (FeCl3) were used as catalyses. As a result, it was determined that temperature and catalysis types were effective parameters in the yields of char, bio-oil and gas products. Also it was determined that the conversion of wood materials into fuel or valuable chemicals with the pyrolysis method is an applicable technology.
Açıklama
Anahtar Kelimeler
Biomass, bio-oil, scots pine (Pinus sylvestris L.), pyrolysis
Kaynak
Journal of the Faculty of Engineering and Architecture of Gazi University
WoS Q Değeri
Q4
Scopus Q Değeri
Cilt
28
Sayı
3
