An Optimization Study on Resistance Spot Welding of DP600 Sheet Steel via Experiment and Statistical Analysis

Basit Öğe Kaydı
dc.authoriddemir, BILGE/0000-0002-3617-9749
dc.contributor.authorAlzahougi, Abdulkarim
dc.contributor.authorDemir, Bilge
dc.contributor.authorElitas, Muhammed
dc.date.accessioned2024-09-29T16:12:25Z
dc.date.available2024-09-29T16:12:25Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractResistance Spot Welding (RSW) is widely used in many automotive, boiler, and ship manufacturing industries. Therefore, the optimization and effectiveness of the RSW process are very useful and cost-efficient processes in addition to improving weld quality. This study used various welding parameters to investigate the optimization of the RSW process of Advanced High Strength Steel (AHSS). RSW was carried out using different welding times, currents, and electrode pressure values. Microstructural analysis, nugget formation, and tensile shear test were performed on samples. This study applied the Taguchi method and ANOVA to set up the welding process and optimize its results. Microstructural characterization showed that the weld nugget microstructures had a high-volume fraction of martensite. Using the Minitab software, Taguchi (DOE) and ANOVA on the tensile shear test results showed that welding current is more effective than clamping pressure on the tensile shear load-bearing capacity (TLBC). However, clamping pressure affects the weld current effects on weld performance. Additionally, the TLBC of RSW samples increases, whereas increasing the clamping pressure leads to a decrease in TLBC and nugget dimensions. Consequently, a detailed analysis of the RSW coefficients and their effects led to optimized results.en_US
dc.description.sponsorshipScientific Research Projects Coordination Unit of Karabuk University [KBUBAP-17-KP-463]en_US
dc.description.sponsorshipACKNOWLEDGMENT The authors would like to thank TOFAS Inc. in Bursa, Turkiye, for supplying the steel material used in this study. This work was supported by the Scientific Research Projects Coordination Unit of Karabuk University, Turkiye, with project number: KBUBAP-17-KP-463.en_US
dc.identifier.endpage11111en_US
dc.identifier.issn2241-4487
dc.identifier.issn1792-8036
dc.identifier.issue4en_US
dc.identifier.startpage11106en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8756
dc.identifier.volume13en_US
dc.identifier.wosWOS:001049834500009en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherEos Assocen_US
dc.relation.ispartofEngineering Technology & Applied Science Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAHSSen_US
dc.subjectresistance spot weldingen_US
dc.subjecttensile shear load bearing capacityen_US
dc.subjectoptimizationen_US
dc.titleAn Optimization Study on Resistance Spot Welding of DP600 Sheet Steel via Experiment and Statistical Analysisen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu