The influence of the heat treatment on mechanical and microstructure properties of Fe-Mn-C high-manganese steel

Basit Öğe Kaydı
dc.authoridAkinay, Yuksel/0000-0002-6171-6307
dc.contributor.authorAkinay, Y.
dc.contributor.authorHayat, F.
dc.date.accessioned2024-09-29T16:08:29Z
dc.date.available2024-09-29T16:08:29Z
dc.date.issued2016
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe influence of the heat treatment on mechanical properties and microstructures of the Fe-22Mn-0.6C high-manganese steel was investigated at different annealing temperatures. A high-Mn TWIP (Twinning Induced Plasticity) steel specimens (0.6C, 24Mn steel) were fabricated, and were annealed at 700, 900, and 1100 degrees C for 150 min and then air-cooled. The carbide precipitates in the microstructure of specimens were annealed at 700 degrees C. However, the microstructure of specimens annealed at 900 and 1100 degrees C is austenite and some grains include annealing and mechanical twins. The results show that tensile strength of the material decreased, and the ductility of material was improved with increasing annealing temperature. Besides that, hardness value decreased between 700 and 1100 degrees C, which shows a good agreement with the equilibrium dissolution temperature of M3C carbides.en_US
dc.identifier.doi10.4149/km_2016_2_91
dc.identifier.endpage96en_US
dc.identifier.issn0023-432X
dc.identifier.issn1338-4252
dc.identifier.issue2en_US
dc.identifier.startpage91en_US
dc.identifier.urihttps://doi.org/10.4149/km_2016_2_91
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7583
dc.identifier.volume54en_US
dc.identifier.wosWOS:000376215800002en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherRedakcia Kovove Materialyen_US
dc.relation.ispartofKovove Materialy-Metallic Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjecthigh-manganese steelen_US
dc.subjectheat treatmenten_US
dc.subjectSEMen_US
dc.subjectcold rollingen_US
dc.subjectTWIP steelen_US
dc.subjectmicrostructureen_US
dc.titleThe influence of the heat treatment on mechanical and microstructure properties of Fe-Mn-C high-manganese steelen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu