MIG WELDING OF AISI 409 AND C1010 STEEL USING AN AUSTENITIC ELECTRODE AND INVESTIGATION OF THEIR MECHANICAL PROPERTIES

Küçük Resim Yok

Tarih

2009

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Gazi Univ, Fac Engineering Architecture

Erişim Hakkı

info:eu-repo/semantics/closedAccess

Özet

In this study, joinability of dissimilar metals by using gas metal arc welding was investigated. For this aim, a ferritic stainless steel (AISI 409) and a low carbon steel (C 1010) were joined at different welding parameters through automated robotic gas metal arc welding process using an austenitic filler metal. Mechanical and metallographic properties of the specimens were obtained by means of tensile test, bending test, microhardness test, impact test and optical microscopy examinations. In the tensile tests, fracture always occurred in the low carbon steel portion of the welded specimens away from the weld zone. Visual observation of the bended specimens showed no crack and tears. For all welding parameters, hardness test results showed that weld metal gave higher hardness value than HAZ and base metal. From the results of metallographic examination, it was seen that grain growth in the weld metal and HAZ increased with increasing heat input.

Açıklama

Anahtar Kelimeler

MIG welding, dissimilar welding, ferritic stainless steel, welding robot

Kaynak

Journal of the Faculty of Engineering and Architecture of Gazi University

WoS Q Değeri

N/A

Scopus Q Değeri

Cilt

24

Sayı

1

Künye