Abrasive wear behavior and mechanical properties of Al-Si/SiC composites

Basit Öğe Kaydı
dc.authoridCimenoglu, Huseyin/0000-0002-9921-7108
dc.authoridAHLATCI, Hayrettin/0000-0002-6766-4974
dc.authoridCandan, Ercan/0000-0002-0610-5044
dc.contributor.authorAhlatci, A
dc.contributor.authorCandan, E
dc.contributor.authorÇimenoglu, H
dc.date.accessioned2024-09-29T16:00:56Z
dc.date.available2024-09-29T16:00:56Z
dc.date.issued2004
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the effect of Si addition up to 8% Si on the abrasive wear and mechanical properties of Al-Si/60 vol.% SiC composites produced by pressure infiltration technique has been investigated. Optimum properties in terms of improved strength and abrasion resistance without significant loss in toughness were obtained when the matrix alloy contained 1% Si. At Si contents higher than 1%, dramatic decrease of toughness was accompanied a reduction in strength and abrasion resistance. (C) 2004 Elsevier B.V. All rights reserved.en_US
dc.identifier.doi10.1016/j.wear.2004.03.006
dc.identifier.endpage632en_US
dc.identifier.issn0043-1648
dc.identifier.issn1873-2577
dc.identifier.issue5-6en_US
dc.identifier.startpage625en_US
dc.identifier.urihttps://doi.org/10.1016/j.wear.2004.03.006
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5427
dc.identifier.volume257en_US
dc.identifier.wosWOS:000223362500019en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherElsevier Science Saen_US
dc.relation.ispartofWearen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectabrasion resistanceen_US
dc.subjectAl-Si alloyen_US
dc.subjectSiCen_US
dc.subjectcompositesen_US
dc.subjectmechanical propertiesen_US
dc.titleAbrasive wear behavior and mechanical properties of Al-Si/SiC compositesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu