The Effect of Aging and Sliding Speed on Wear Behaviour of Cu-Cr-Zr Alloy

dc.contributor.authorOzyurek, Dursun
dc.contributor.authorCiftci, Ibrahim
dc.contributor.authorTuncay, Tansel
dc.date.accessioned2024-09-29T16:10:18Z
dc.date.available2024-09-29T16:10:18Z
dc.date.issued2013
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the sliding wear behaviour of non-aged and aged Cu-Cr-Zr alloy specimens were investigated. The specimens were aged for 2 h at the temperatures of 450 degrees C and 475 degrees C. Prior to the wear tests, microstructural examinations and hardness measurements were performed on all Cu-Cr-Zr alloy specimens. The wear tests were performed on a pin-on disk type wear apparatus at the sliding speeds of 0.5 ms(-1), 1.0 ms(-1) and 1.5 ms(-1) as well as under 40 N applied load. After the wear tests, the worn surfaces of all samples were analyzed by SEM and energy dispersive X-ray spectroscopy (EDS). The experimental results indicated that aging heat treatment led to increase in the hardness values of Cu-Cr-Zr alloys and the highest wear loss was observed for non-aged specimens. With increasing sliding speed, the wear loss increased to a maximum value beyond which it decreased.en_US
dc.identifier.endpage471en_US
dc.identifier.issn0025-5300
dc.identifier.issue6en_US
dc.identifier.startpage468en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8111
dc.identifier.volume55en_US
dc.identifier.wosWOS:000320151700007en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBe Alloyen_US
dc.subjectMicrostructureen_US
dc.subjectPrecipitationen_US
dc.subjectFrictionen_US
dc.titleThe Effect of Aging and Sliding Speed on Wear Behaviour of Cu-Cr-Zr Alloyen_US
dc.typeArticleen_US

Dosyalar