Optimization and Finite Element Modelling of Tool Wear in Milling of Inconel 625 Superalloy

Basit Öğe Kaydı
dc.authoridAKGUN, Mahir/0000-0002-4522-066X
dc.authoridDEMIR, Halil/0000-0002-9802-083X
dc.contributor.authorAkgun, Mahir
dc.contributor.authorDemir, Halil
dc.date.accessioned2024-09-29T16:06:52Z
dc.date.available2024-09-29T16:06:52Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study focuses on optimization of cutting conditions and numerical analysis of flank wear in milling of Inconel 625 superalloy using PVD AlTiN and CVD TiCN/Al2O3/TiN-coated carbide inserts. The milling experiments have been performed in CNC vertical machining centre according to Taguchi L18 orthogonal array. Finite element modelling of tool wear was performed using Deform 3D software. Analysis of variance was utilized to define the influences of the milling conditions on Vb. The results showed that the feed rate (with 41.5% contribution rate) is the most important parameter affecting Vb. The linear and quadratic regression analyses were used to estimate the results of the test. The regression analysis results showed that the estimated Vb values achieved by the quadratic regression model were more effective compared to the linear regression model. Statistical results revealed that the Taguchi method was successful to define optimum cutting parameters in the milling of Inconel 625.en_US
dc.description.sponsorshipScientific and Technological Research Council of Turkey (TUBITAK) [119M785]en_US
dc.description.sponsorshipThe authors would like to thank the Scientific and Technological Research Council of Turkey (TUBITAK) for the financial support with project number 119M785.en_US
dc.identifier.doi10.2339/politeknik.706605
dc.identifier.endpage400en_US
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.issue2en_US
dc.identifier.startpage391en_US
dc.identifier.trdizinid423975en_US
dc.identifier.urihttps://doi.org/10.2339/politeknik.706605
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/423975
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7098
dc.identifier.volume24en_US
dc.identifier.wosWOS:000661468600005en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isoenen_US
dc.publisherGazi Univen_US
dc.relation.ispartofJournal of Polytechnic-Politeknik Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectInconel 625en_US
dc.subjectmillingen_US
dc.subjecttool wearen_US
dc.subjecttaguchien_US
dc.subjectfinite element analysisen_US
dc.titleOptimization and Finite Element Modelling of Tool Wear in Milling of Inconel 625 Superalloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu