THE EFFECT OF PROCESS PARAMETERS ON MACHINING VOLUME AND DEPTH OF CUT IN TURNING OPERATION OF AISI 1040 STEEL WITH ABRASIVE WATER JET

Basit Öğe Kaydı
dc.contributor.authorKartal, Fuat
dc.contributor.authorGokkaya, Hasan
dc.date.accessioned2024-09-29T16:09:48Z
dc.date.available2024-09-29T16:09:48Z
dc.date.issued2014
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study the effect of processing parameters during turning of AISI 1040 steel with abrasive water jet on machining volume and depth of cut. In the study, in order to keep the experiment quantity low, former studies in literature were taken into consideration and therefore experiments were realized with processing parameters and experiences that are most suitable to pre-experiments. In experimental studies pump pressure (350 MPa), abrader dimensions (in garnet form and dimension 80 mesh) and nozzle diameter (1.2 mm) were kept constant. 1040 steel with dimensions of empty set 30 and 240 mm were processed at four different abrader flow rate (50, 150, 250 and 350 gr/min), nozzle distance (2, 5, 8 and 11 mm), nozzle feed rate (5, 15, 25 and 35 mm/min) and lathe chuck revolutions (25, 50, 75 and 100 rpm). According to the findings the most highly material removal rate of 5 mm / min nozzle feed rate 1387.25 mm(3) in the amount has been achieved. The maximum depths of cut 0.94 mm spindle speed of 100 rpm were obtained.en_US
dc.identifier.doi10.5505/pajes.2014.29494
dc.identifier.endpage24en_US
dc.identifier.issn1300-7009
dc.identifier.issn2147-5881
dc.identifier.issue1en_US
dc.identifier.startpage20en_US
dc.identifier.urihttps://doi.org/10.5505/pajes.2014.29494
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7789
dc.identifier.volume20en_US
dc.identifier.wosWOS:000443150600004en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isotren_US
dc.publisherPamukkale Univen_US
dc.relation.ispartofPamukkale University Journal of Engineering Sciences-Pamukkale Universitesi Muhendislik Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAbrasive water jet cuttingen_US
dc.subjectTurningen_US
dc.subjectAISI 1040en_US
dc.subjectChip volumeen_US
dc.subjectDepth of cuten_US
dc.titleTHE EFFECT OF PROCESS PARAMETERS ON MACHINING VOLUME AND DEPTH OF CUT IN TURNING OPERATION OF AISI 1040 STEEL WITH ABRASIVE WATER JETen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu