Mechanical properties of low carbon steel produced by gmaw-based additive manufacturing

Basit Öğe Kaydı
dc.contributor.authorGünay, Mustafa
dc.contributor.authorYesildag, Iskender
dc.date.accessioned2024-09-29T16:30:47Z
dc.date.available2024-09-29T16:30:47Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractWire arc additive manufacturing has high flexibility and efficiency, especially for the economical production of large-size metal parts and a range of applications that require relatively high deposition rates. In this study, the variation of the mechanical properties (tensile strength and microhardness) of the part produced by GMAW-based additive manufacturing from low carbon steel wire according to the deformation rate was investigated. In this context, tensile tests at 1 and 4 mm/sec speeds were applied to the samples prepared perpendicular and parallel to the seam direction from the additive manufacturing part. In the samples perpendicular to the weld seam direction, an increase in tensile strength was observed with an increase in the deformation rate due to the anisotropic behavior in ductility, while a decrease in percent elongation was determined. With the increase of the tensile speed four times, the average tensile strength of the sample parallel to the seam direction was 545 MPa, and the vertical specimen was 524 MPa. In the sample parallel to the seam direction, there was an increase in microhardness as a result of tensile deformation compared to the original sample, while this increase was calculated as 56% and 64% on average for 1 mm/sec and 4 mm/sec, respectively. Although there was a slight decrease in this ratio in samples perpendicular to the seam direction, the increase in microhardness values compared to the original sample was determined as 46% and 53%, respectively.en_US
dc.identifier.doi10.30855/gmbd.2021.03.01
dc.identifier.endpage182en_US
dc.identifier.issn2149-4916
dc.identifier.issue3en_US
dc.identifier.startpage175en_US
dc.identifier.trdizinid1118666en_US
dc.identifier.urihttps://doi.org/10.30855/gmbd.2021.03.01
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1118666
dc.identifier.urihttps://hdl.handle.net/20.500.14619/10889
dc.identifier.volume7en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isoenen_US
dc.relation.ispartofGazi Mühendislik Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleMechanical properties of low carbon steel produced by gmaw-based additive manufacturingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu