Effect on Formations of Built-up Edge and Built-up Layer, Surface Roughness of Cutting Speed and Rake Angle in the Machining of Aluminum Alloys

Basit Öğe Kaydı
dc.contributor.authorSekmen, Mustafa
dc.contributor.authorGunay, Mustafa
dc.contributor.authorSeker, Ulvi
dc.date.accessioned2024-09-29T16:06:49Z
dc.date.available2024-09-29T16:06:49Z
dc.date.issued2015
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the effects on surface roughness of cutting parameters (tool rake angle and cutting speed) were investigated in the machining of AA 2011 and AA 7075 aluminum alloys. The interactions between the cutting parameters and Build-up edge (BUE), Built-up layer (BUL) formed on tool rake face were also evaluated the same machining processes. In the machining tests, the testing apparatus which allowing chip removal by giving rake angle in both positive and negative side to the cutting tool was used. The average surface roughness (Ra) values for both alloys were considerably high in especially small values of rake angle (0 degrees and -5 degrees) for AA 7075 alloy, while Ra values for both alloys have been low in larger values of rake angle (15 degrees ve 20 degrees). The effect of the formations BUE and BUL of the rake angle and the alloy content were evaluated by examining uncoated carbide cutting tools used in cutting experiments with metallographic methods (SEM and EDS analysis). Consequently, the formation of BUE and BUL for AA 7075 alloy has been greater than that of AA 2011 alloy.en_US
dc.identifier.doi10.2339/2015.18.3141-148
dc.identifier.endpage148en_US
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.issue3en_US
dc.identifier.startpage141en_US
dc.identifier.urihttps://doi.org/10.2339/2015.18.3141-148
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7052
dc.identifier.volume18en_US
dc.identifier.wosWOS:000447831900005en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isotren_US
dc.publisherGazi Univen_US
dc.relation.ispartofJournal of Polytechnic-Politeknik Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAluminum alloysen_US
dc.subjectRake angleen_US
dc.subjectSurface roughnessen_US
dc.subjectBuilt-up edgeen_US
dc.subjectBuilt-up layeren_US
dc.titleEffect on Formations of Built-up Edge and Built-up Layer, Surface Roughness of Cutting Speed and Rake Angle in the Machining of Aluminum Alloysen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu