EFFECT OF INDIUM ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AS-CAST AND HOT-ROLLED AM60 MAGNESIUM ALLOY

Basit Öğe Kaydı
dc.authoridAHLATCI, Hayrettin/0000-0002-6766-4974
dc.authoridZengin, Huseyin/0000-0001-7518-1625
dc.contributor.authorZengin, Huseyin
dc.contributor.authorTuren, Yunus
dc.contributor.authorAhlatci, Hayrettin
dc.contributor.authorSun, Yavuz
dc.date.accessioned2024-09-29T16:11:29Z
dc.date.available2024-09-29T16:11:29Z
dc.date.issued2017
dc.departmentKarabük Üniversitesien_US
dc.description26th International Conference on Metallurgy and Materials (METAL) -- MAY 24-26, 2017 -- Brno, CZECH REPUBLICen_US
dc.description.abstractIn this study, effect of indium (In) addition on microstructure and mechanical properties of AM60 magnesium alloys was investigated. In additions were made by 0.2, 0.5 and 1 wt.%. Alloys were produced by conventional gravity casting in a steel mould. A homogenization treatment at 350 degrees C for 24 h was performed after casting processes. Homogenized samples were 1 pass hot-rolled by 40 % thickness reduction at 350 degrees C. The results showed that the average grain size of as-cast and hot-rolled AM60 alloys decreased with In addition. SEM analysis revealed that In addition led to formation of tiny Mg-In binary second phases at triple junctions. Tensile strength of as-cast AM60 alloy increased with increasing amount of In up to 0.5 wt.% above which it decreased. However, after hot-rolling process, AM60 alloy containing 0.2 wt.% In showed the best tensile properties. These improvements were attributed to the refinement of microstructure and dispersion strengthening by Mg In intermetallic phases.en_US
dc.description.sponsorshipTanger,Tech Univ Ostrava,Czech Soc New Mat & Technologies,Engn Acad Czech Republic,Czech Metallurg Soc,Mat Res Soc Serbia,Soc Portuguesa Materiais,Austrian Soc Metallurgy & Mat,Norsk Materialteknisk Selskap,Assoc Italiana Metallurgia,Soc Francaise Metallurgie Materiaux,Thermo Calc Software,BVD,COMTES FHT,CSNMT,LInde,PECION s r o,Reg Mat Sci & Technol Ctr,ZEISS,OLYMPUSen_US
dc.description.sponsorshipKarabuk University Scientific Research Projects (BAP) [KBU-BAP-15/2-KP-059]en_US
dc.description.sponsorshipThis research is supported by Karabuk University Scientific Research Projects (BAP) with project no. KBU-BAP-15/2-KP-059.en_US
dc.identifier.endpage1542en_US
dc.identifier.isbn978-80-87294-79-6
dc.identifier.startpage1537en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8480
dc.identifier.wosWOS:000434346900248en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherTanger Ltden_US
dc.relation.ispartofMetal 2017: 26th International Conference On Metallurgy and Materialsen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAM60 magnesium alloysen_US
dc.subjectindium modificationen_US
dc.subjectrollingen_US
dc.subjectmicrostructureen_US
dc.subjectmechanical propertiesen_US
dc.titleEFFECT OF INDIUM ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AS-CAST AND HOT-ROLLED AM60 MAGNESIUM ALLOYen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu