INFLUENCE OF PLASTIC DEFORMATION CARBON STEEL ON THE PROCESS OF BURNING ELECTRIC ARC

Basit Öğe Kaydı
dc.authoridPlitchenko, Serhii/0000-0002-0613-2544
dc.contributor.authorVakulenko, Igor Alex
dc.contributor.authorPlitchenko, Sergey
dc.contributor.authorKurt, Bulent
dc.contributor.authorAskerov, Hangardas
dc.contributor.authorProydak, Svetlana
dc.contributor.authorErdogdu, Ahmet Emrah
dc.date.accessioned2024-09-29T16:06:40Z
dc.date.available2024-09-29T16:06:40Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractDuring a study of the combustion process of a direct polarity electric arc, a directly proportional dependence of the electric current value on the degree of cold plastic deformation of carbon steel used as an electrode was found. To calculate the value of the electric current during arc burning, in the indicated ratio, it was proposed to replace the surface tension force of the liquid metal with the surface tension of ferrite of plastically deformed carbon steel. Calculation of the ferrite's surface tension value on the deformation degree of the steel under study through the size of the coherent scattering regions was used to explain the observed dependence of the electric current during arc burning. From the analysis of the considered correlation ratios, it was found that with an increase in the cold deformation degree, the refinement of the coherent scattering regions results in the ferrite's surface tension increase and consequently, to an increase in the electric current during arc burning. Comparative analysis of the obtained results of calculating the value of electric current during arc burning through the surface tension of ferrite of cold-deformed carbon steel showed a fairly good coincidence with experimental data. The differences did not exceed 9%.en_US
dc.identifier.doi10.20858/sjsutst.2021.112.7.17
dc.identifier.endpage218en_US
dc.identifier.issn0209-3324
dc.identifier.issn2450-1549
dc.identifier.startpage211en_US
dc.identifier.urihttps://doi.org/10.20858/sjsutst.2021.112.7.17
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6973
dc.identifier.volume112en_US
dc.identifier.wosWOS:000670445800017en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherFac Transport Silesian Univ Technologyen_US
dc.relation.ispartofScientific Journal of Silesian University of Technology-Series Transporten_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectsubstructureen_US
dc.subjectdensity dislocationen_US
dc.subjectelectric currenten_US
dc.subjectplastic deformationen_US
dc.subjectcementiteen_US
dc.subjectferriteen_US
dc.titleINFLUENCE OF PLASTIC DEFORMATION CARBON STEEL ON THE PROCESS OF BURNING ELECTRIC ARCen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu