Optimization of 3D Printing Operation Parameters for Tensile Strength in PLA Based Sample

dc.authoridYASAR, NAFIZ/0000-0002-1427-1384
dc.authoridKACAR, Ramazan/0000-0002-3903-1838
dc.contributor.authorGunay, Mustafa
dc.contributor.authorGunduz, Suleyman
dc.contributor.authorYilmaz, Hakan
dc.contributor.authorYasar, Nafiz
dc.contributor.authorKacar, Ramazan
dc.date.accessioned2024-09-29T16:06:51Z
dc.date.available2024-09-29T16:06:51Z
dc.date.issued2020
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the mechanical properties of PLA+ samples produced by using fused deposition method (FDM) based 3D printer were investigated in detail for the effects of printing speed, infill rate and raster angle. For this purpose, standard tensile test specimens were prepared with a 3D printer according to Taguchi L-18 experimental design. The effects on the tensile strength of the process parameters (printing speed, infill rate and raster angle) were determined by analysis of variance (ANOVA). In addition, the process parameters for the tensile strength were optimized by applying the Taguchi methodology. Consequently, while the most effective parameter on the tensile strength was the infill rate, the raster angle and the printing speed were determined as other important parameters, respectively.en_US
dc.identifier.doi10.2339/politeknik.422795
dc.identifier.endpage79en_US
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.issue1en_US
dc.identifier.startpage73en_US
dc.identifier.trdizinid419767en_US
dc.identifier.urihttps://doi.org/10.2339/politeknik.422795
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/419767
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7088
dc.identifier.volume23en_US
dc.identifier.wosWOS:000506639500010en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isotren_US
dc.publisherGazi Univen_US
dc.relation.ispartofJournal of Polytechnic-Politeknik Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subject3D printingen_US
dc.subjectFDMen_US
dc.subjecttensile strengthen_US
dc.subjectoptimizationen_US
dc.subjectPLAen_US
dc.titleOptimization of 3D Printing Operation Parameters for Tensile Strength in PLA Based Sampleen_US
dc.title.alternativePLA Esaslı Numunelerde Çekme Dayanımı için 3D Baskı İşlem Parametrelerinin Optimizasyonuen_US
dc.typeArticleen_US

Dosyalar