Experimental investigation of the effect of process parameters on springback behavior of SCGADUB1180 high strength sheet

Basit Öğe Kaydı
dc.contributor.authorKarabulut, Samet
dc.contributor.authorEsen, Ismail
dc.date.accessioned2024-09-29T16:09:50Z
dc.date.available2024-09-29T16:09:50Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractHigh strength and light high strength steels are widely used in the automotive industry. Springback is as important a problem as tearing and thinning in the shaping of high-strength sheets. In this study, the mechanical properties of SCGADUB1180 high-strength sheet were determined by performing tensile tests and the effects of punch speed, die angle, holding time, rolling direction parameters on springback were experimentally investigated in the V bending process. No research has been found in the literature on the shaping and springback behavior of SCGADUB1180 high strength sheet. As a result of the test results, as the punch speed increased, the springback values increased at 60 degrees, 90 degrees and 120 degrees bending angles. When punch speed increased from 3 mm/sec to 10 mm/sec at 60 degrees bend angle, springback increased 1.87% in 0 degrees rolling direction, 0.35% in 45 degrees rolling direction and 9.78% in 90 degrees rolling direction. When punch speed increased from 3 mm/sec to 10 mm/sec at 90 degrees bend angle, springback increased 5.87% in 0 degrees rolling direction, 0.55% in 45 degrees rolling direction and 4.77% in 90 degrees rolling direction. When punch speed increased from 3 mm/sec to 10 mm/sec at 120 degrees bend angle, springback increased 27% in 0 degrees rolling direction, 0.49% in 45 degrees rolling direction, and 3.5% in 90 degrees rolling direction. Springback values are lowest at 3 mm/sec punch speed. When the holding time was increased from 0.2 s to 1 s, the springback value decreased by 5.56%. The least springbacks were observed in the O degrees rolling direction. The amount of springback increased with increasing die angle. The experimental results obtained will help to predict the springback behavior of high strength sheets and to understand their mechanical behavior in the bending process.en_US
dc.identifier.doi10.5505/pajes.2022.76329
dc.identifier.endpage75en_US
dc.identifier.issn1300-7009
dc.identifier.issn2147-5881
dc.identifier.issue1en_US
dc.identifier.startpage68en_US
dc.identifier.trdizinid1188503en_US
dc.identifier.urihttps://doi.org/10.5505/pajes.2022.76329
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1188503
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7804
dc.identifier.volume29en_US
dc.identifier.wosWOS:000934061100007en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isoenen_US
dc.publisherPamukkale Univen_US
dc.relation.ispartofPamukkale University Journal of Engineering Sciences-Pamukkale Universitesi Muhendislik Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectV bendingen_US
dc.subjectSpringbacken_US
dc.subjectSCGADUB1180en_US
dc.titleExperimental investigation of the effect of process parameters on springback behavior of SCGADUB1180 high strength sheeten_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu