Microstructure and mechanical properties of aluminum alloys AA5754 and AA6013 joined by GMAW (Gas metal arc welding) method

Basit Öğe Kaydı
dc.authoridKAHRAMAN, NIZAMETTIN/0000-0002-7152-3795
dc.contributor.authorMercan, Emine
dc.contributor.authorAyan, Yusuf
dc.contributor.authorKahraman, Nizamettin
dc.date.accessioned2024-09-29T16:09:49Z
dc.date.available2024-09-29T16:09:49Z
dc.date.issued2020
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe use of aluminum alloys in industry have been increased in due to their excellent low weight, corrosion resistance also other good features. Different aluminum alloys are joined with together when need of a structure presents different physical or mechanical properties with together. In this study, different aluminum alloys AA5754 and AA6013 joined by GMAW (gas metal arc welding) method under different welding parameters. After that, three-point bending test was carried out and notch impact test was performed to determine toughness behavior of the joints. In addition, the weld zone is characterized with hardness test and microstructure studies. While the welded samples joined with convenient parameters were bended 180 degrees, the cracks and fractures were occurred on the fusion line boundary of some samples due to unsuitable parameters. According to impact toughness test results, the highest toughness value was obtained from the HAZ (Heat affected zone) of AA5754. Besides, toughness values evaluated from the HAZ of AA6013 on the joints and weld metal were nearly same. With respect to hardness test results, the maximum hardness value was measured at the HAZ of AA6013 and this was followed by the weld metal and the HAZ of AA5754 sequentially. From the point of microstructure inspections, structures of all the weld metals were dendritic.en_US
dc.identifier.doi10.5505/pajes.2019.38063
dc.identifier.endpage87en_US
dc.identifier.issn1300-7009
dc.identifier.issn2147-5881
dc.identifier.issue1en_US
dc.identifier.startpage82en_US
dc.identifier.trdizinid388650en_US
dc.identifier.urihttps://doi.org/10.5505/pajes.2019.38063
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/388650
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7796
dc.identifier.volume26en_US
dc.identifier.wosWOS:000514814600011en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isotren_US
dc.publisherPamukkale Univen_US
dc.relation.ispartofPamukkale University Journal of Engineering Sciences-Pamukkale Universitesi Muhendislik Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAA5754en_US
dc.subjectAA6013en_US
dc.subjectAluminum alloysen_US
dc.subjectGMAWen_US
dc.titleMicrostructure and mechanical properties of aluminum alloys AA5754 and AA6013 joined by GMAW (Gas metal arc welding) methoden_US
dc.title.alternativeGazaltı metal ark kaynak (GMAK) yöntemiyle birleştirilen AA5754 ve AA6013 alüminyum alaşımlarının mikro yapı ve mekanik özelliklerien_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu