Determination of the influence of some boric acid added adhesives on combustion properties of beech wood
Küçük Resim Yok
Tarih
2014
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Kastamonu Univ, Orman Fak
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Wood is a material that is always sympathized by human beings due to its naturality and used for very different purposes in many areas. In this study, beech wood samples were prepared according to ASTM-E-69 and TS 3891 standards and laminated with boric acid added phenol-formaldehyde, urea formaldehyde and PVAc adhesives. Then, the combustion properties of wood material that was obtained from lamination were researched. For the combustion test, the air dried (12 %) samples were prepared in size of 4,5x19x1016 mm and then laminated. For that purpose, 5% solution of boric acid was added in the rate of 5% to phenol-formaldehyde, urea formaldehyde and PVAc adhesives. Combustion value was determined according to ASTM-E 69. In combustion case, it is determined that boric acid has a fire retardant efficacy. Bonding strength samples were prepared in size of 5x18x150mm. Then, gluing process was carried out.
Açıklama
Anahtar Kelimeler
Beech, Combustion, Impregnation, Adhesive
Kaynak
Kastamonu University Journal of Forestry Faculty
WoS Q Değeri
N/A
Scopus Q Değeri
Cilt
14
Sayı
2
