Statistical process control applications in plywood manufacturing
Küçük Resim Yok
Tarih
2024
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Pamukkale Univ
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Wood is a widely used material in industry due to its sufficient loadcarrying capacity, obtaining from sustainable sources and easiness in its processing, etc. Plywood is a wood panel manufactured from layers of wood veneer and combined under pressure with an adhesive. Plywood panels are widely used in the furniture and construction industry. In this study, the nonconformities during the plywood production process are analyzed using statistical process control methods. First, check sheet are created. p -quality control chart is created using this data. p -control chart is evaluated to investigate whether the process provides the desired quality level. In addition, the tree diagram and the cause -effect diagram are created after the information obtained by brainstorming technique. Also, in order to control the improvements in the process, an additional data including 15 days of data were collected in the 2nd Stage and a p -control chart was created. In this research, the nonconformities of plywood production process and their possible causes are analyzed.
Açıklama
Anahtar Kelimeler
Statistical process control, Check sheet, Tree diagram, p-chart, Cause-Effect diagram, Plywood
Kaynak
Pamukkale University Journal of Engineering Sciences-Pamukkale Universitesi Muhendislik Bilimleri Dergisi
WoS Q Değeri
N/A
Scopus Q Değeri
Cilt
30
Sayı
2
