Investigation of erosive wear behavior of granulated blast furnace slag on hard coated and uncoated steels

Basit Öğe Kaydı
dc.contributor.authorDemirsoz, Recep
dc.contributor.authorPolat, Refik
dc.contributor.authorTurk, Ahmet
dc.contributor.authorErdogan, Garip
dc.date.accessioned2024-09-29T16:06:29Z
dc.date.available2024-09-29T16:06:29Z
dc.date.issued2019
dc.departmentKarabük Üniversitesien_US
dc.description.abstractOne of the biggest problems in industrial plants is wear that directly affects equipment life. In integrated plants such as blast furnaces, many types of wear are encountered, one of which is erosive wear. Slurry erosion is one of the effective types of erosive wear. During the transfer of the slag into the liquid medium, the transport equipment is exposed to slurry erosion. The high amount of erosion seriously shortens the life of the equipment where the transportation is carried out and increases the maintenance-repair costs. In this study, blast furnace slag was used in the slurry erosive wear test system and the abrasivity of the St 37-2 reference standard pipe material, Hardox 400 and W2C-NiCrBSi coating materials was investigated. The slag was sieved to an average particle size of 505 mu m and slurry containing 10%, 20% and 30% by weight of slag was prepared. The experiments were carried out at 2 m/s and 4 m/s peripheral speed values at the partical normal impact angle (90 degrees). It has been determined by these experimental studies that the abrasivity of the slag prepared at a certain grain size is directly related to the concentration and the rotation speed (material conveyance speed) and that the wear is also increased by increasing the concentration and rotation speed. The wear values of the materials used as specimens are determined from high to low respectively as St 37-2, Hardox 400 and W2C-NiCrBSi coating material. In addition, the morphological structures of the worn surfaces were examined using SEM(Scanning Electron Microscope) in order to understand the wear mechanisms.en_US
dc.description.sponsorshipResearch Fund of Karabuk University [KBU-BAP-13/2-DR-014]en_US
dc.description.sponsorshipThis study was supported by Research Fund of Karabuk University (Project number: KBU-BAP-13/2-DR-014)en_US
dc.identifier.doi10.17341/gazimmfd.416467
dc.identifier.endpage113en_US
dc.identifier.issn1300-1884
dc.identifier.issn1304-4915
dc.identifier.issue1en_US
dc.identifier.startpage103en_US
dc.identifier.trdizinid388556en_US
dc.identifier.urihttps://doi.org/10.17341/gazimmfd.416467
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/388556
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6865
dc.identifier.volume34en_US
dc.identifier.wosWOS:000462490600008en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isotren_US
dc.publisherGazi Univ, Fac Engineering Architectureen_US
dc.relation.ispartofJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectGranulated slagen_US
dc.subjecthard coatingen_US
dc.subjecterosive wearen_US
dc.subjectconcentrationen_US
dc.subjectnormal impact angleen_US
dc.titleInvestigation of erosive wear behavior of granulated blast furnace slag on hard coated and uncoated steelsen_US
dc.title.alternativeYüksek fırın granüle cürufunun sert kaplama uygulanmış ve uygulanmamış çeliklere karşı erozif aşındırma davranışının incelenmesien_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu