THE BENDING MOMENT CAPACITIES OF MITRE FRAME CORNER JOINTS WITH DOVETAIL FITTINGS

Basit Öğe Kaydı
dc.authoridKilic, Murat/0000-0001-6113-8634
dc.authoridALTUN, Suat/0000-0002-7080-7489
dc.contributor.authorKilic, Murat
dc.contributor.authorBurdurlu, Erol
dc.contributor.authorAltun, Suat
dc.contributor.authorBerker, Umut Oezguer
dc.date.accessioned2024-09-29T16:11:19Z
dc.date.available2024-09-29T16:11:19Z
dc.date.issued2009
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the bending moment capacities under the diagonal compression and tensile loadings of the mitre frame corner joints with dovetail fittings were investigated. Solid poplar wood (Populus nigra) was used in the production of framework pieces. Recently, mitre frame corner joints with dovetail fitting are preferred in practice. This has been influential in the making of this study. A total of 80 each mitre frame corner joint specimens with dovetail fitting were prepared for this purpose. Of these, 20 were prepared with polyvinyl acetate (PVAC) adhesive, 20 were prepared with polyurethane (PU) adhesive, 20 were prepared with cyanoacrylate (CA) adhesive and 20 were prepared without adhesive (WA). Solid poplar wood (Populus nigra) was used as a frame material. The specimens were Subjected to diagonal tensile and compression processes in the universal test machine in accordance with ASTM-D 143-94. Tie data obtained at the end of the tests were analyzed statistically and the results were evaluated. According to this, the highest bending moment capacity Under the diagonal compression loading (MC-L) (55.71 N . m) and bending moment capacity under the diagonal tensile loading (MC-T) (160.55 N . m) was obtained in the specimens bonded with PVAC adhesive. Whereas, the lowest MC-L (18.45 N . m) and MC-T (14.06 N . m) was obtained in the specimens without adhesive (WN). The difference between the MC-T and the MC-Cof the specimens bonded with the CA and PU adhesives was insignificant. Accordingly, it is definitely necessary to use adhesives in the bending of dovetail fittings for obtaining a higher MC-T and MC-C. The best result among the available adhesives was obtained with the PVAC adhesive.en_US
dc.identifier.endpage88en_US
dc.identifier.issn1336-4561
dc.identifier.issue3en_US
dc.identifier.startpage79en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8325
dc.identifier.volume54en_US
dc.identifier.wosWOS:000271249900009en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherState Forest Products Research Insten_US
dc.relation.ispartofWood Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectadhesives for wooden_US
dc.subjecttensile strengthsen_US
dc.subjectcompression strengthsen_US
dc.subjectmitre frame corner jointsen_US
dc.titleTHE BENDING MOMENT CAPACITIES OF MITRE FRAME CORNER JOINTS WITH DOVETAIL FITTINGSen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu