Investigation of mechanical and microstructural properties of AA5754/AA6013 dissimilar aluminium alloys joined by GMAW and FSW methods

Basit Öğe Kaydı
dc.authoridKAHRAMAN, NIZAMETTIN/0000-0002-7152-3795
dc.contributor.authorYuruk, A.
dc.contributor.authorAyan, Y.
dc.contributor.authorCevik, B.
dc.contributor.authorKahraman, N.
dc.date.accessioned2024-09-29T16:08:30Z
dc.date.available2024-09-29T16:08:30Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractAluminium alloys AA5XXX and AA6XXX have low density and high yield strength and are frequently used to make air, sea, and land vehicles/technology lighter. Different types of aluminium alloys need to be adaptively assembled together. Therefore, it is important but difficult to weld aluminium alloys. This study investigated the microstructural and mechanical properties of two dissimilar aluminium alloys, AA5754 and AA6013, which were welded using gas metal arc welding (GMAW) and friction stir welding (FSW). Hardness, tensile, bending, and fatigue tests were done on the welded samples. The test results were evaluated and interpreted according to the literature. The weld zone (weld metal, HAZ) of AA5754 and AA6013 aluminium alloys joined by GMAW and FSW showed significant differences. The highest tensile strength and fatigue life were obtained from the FSWed sample after the base metals. The welded samples joined using both welding methods were successfully deformed by 180 degrees without damaging their upper or lower surfaces.en_US
dc.description.sponsorshipKarabuk University Scientific Research Project Committee [KBUBAP-17-DR-406]en_US
dc.description.sponsorshipThe authors would like to thank the Karabuk University Scientific Research Project Committee for funding KBUBAP-17-DR-406.en_US
dc.identifier.doi10.4149/km20214245
dc.identifier.endpage256en_US
dc.identifier.issn0023-432X
dc.identifier.issn1338-4252
dc.identifier.issue4en_US
dc.identifier.startpage245en_US
dc.identifier.urihttps://doi.org/10.4149/km20214245
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7586
dc.identifier.volume59en_US
dc.identifier.wosWOS:000703518600005en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherRedakcia Kovove Materialyen_US
dc.relation.ispartofKovove Materialy-Metallic Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFSWen_US
dc.subjectGMAWen_US
dc.subjectAA5754en_US
dc.subjectAA6013en_US
dc.subjectmicrostructureen_US
dc.subjectfatigue strengthen_US
dc.titleInvestigation of mechanical and microstructural properties of AA5754/AA6013 dissimilar aluminium alloys joined by GMAW and FSW methodsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu