Optimization of surface roughness via the Taguchi method and investigation of energy consumption when milling spheroidal graphite cast iron materials

Basit Öğe Kaydı
dc.authoridnas, engin/0000-0002-4828-9240
dc.contributor.authorNas, Engin
dc.contributor.authorOzturk, Burak
dc.date.accessioned2024-09-29T16:07:56Z
dc.date.available2024-09-29T16:07:56Z
dc.date.issued2018
dc.departmentKarabük Üniversitesien_US
dc.description.abstractDue to its excellent casting ability, spheroidal graphite cast iron is widely used in the production of complex automotive and machine products. In this study, the milling of spheroidal cast iron was carried out at different parameters. First, using the Taguchi statistical method, the parameters affecting surface roughness values were determined to b e cutting tool (65.54 %), then feed rate (19.65%), and finally, with a minimum effect, cutting speed (7.31%). Second, the amount of power consumed during chip removal was observed as being larger than the amount consumed when the machine was operating without a cutting load. Increases in the power index (PI) were measured by an amperemeter and it was determined that, as cutting speed was augmented, the amount of total power (P-total) consumed decreased, while, as feed rate was augmented, total power consumption increased. Total cutting energy (Pcutting) was increased by stepping up cutting speed. The PI was increased as a result of stepping up cutting speed and feed rate. On the basis of the cutting parameters, the Pcutting, P(total )spindle torque (%) and specific energy consumption (SEC) value changes were calculated.en_US
dc.identifier.doi10.3139/120.111181
dc.identifier.endpage525en_US
dc.identifier.issn0025-5300
dc.identifier.issue5en_US
dc.identifier.startpage519en_US
dc.identifier.urihttps://doi.org/10.3139/120.111181
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7257
dc.identifier.volume60en_US
dc.identifier.wosWOS:000451821700012en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCast ironen_US
dc.subjectmachinabilityen_US
dc.subjectsurface roughnessen_US
dc.subjectpower consumptionen_US
dc.subjectTaguchi procedureen_US
dc.titleOptimization of surface roughness via the Taguchi method and investigation of energy consumption when milling spheroidal graphite cast iron materialsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu