Comparison of PID Control Performances of Different PLC Series in a Hydraulic Proportional Valve SystemAn Experimental Setup
Küçük Resim Yok
Tarih
2024
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Gazi Univ
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The significance of both cost and production speed has gained importance within the industrial sector. During the installation of industrial facilities, selection of materials with ideal properties is crucial for achieving the required system performance. Especially, when working with moving equipment, the speed required by the system as well as the costs of the necessary equipment are taken into account. This study compares the operational performances of S7-300, S7-400, S7-1200 and S7-1500 series PLCs with four different CPUs for the hydraulic proportional valve control system in P, PI, PD and PID control modes in Kardemir Inc. Rail and Profile Rolling Mill. Performance comparisons were made based on settling time, rise time, delay time and positive and negative maximum overshoots. For S7-300, S7-400, S7-1200 and S7-1500 series PLCs, minumum settling time values were 18.4 s, 19.2 s, 10.4 s, and 8.9 s; maximum overshoot values were 8.9 mm, 6.9 mm, 0.41 mm, and 0.62 mm; maximum undershoot values were 4.3 mm, 1.9 mm, 0.04 mm, and 0.2 mm, respectively. The results of the study were illustrated using graphs and tables and were further analyzed based on data thus obtained. Based on these analysis results, suggestions were made regarding the type of PLC that would be appropriate to be chosen for the system.
Açıklama
Anahtar Kelimeler
PID, PLC, microcontroller, hydraulic propotional valve
Kaynak
Journal of Polytechnic-Politeknik Dergisi
WoS Q Değeri
N/A
