An Investigation into the Influences of Grain Size and Grinding Parameters on Surface Roughness and Grinding Forces when Grinding

Basit Öğe Kaydı
dc.contributor.authorDemir, Halil
dc.contributor.authorGullu, Abdulkadir
dc.contributor.authorCiftci, Ibrahim
dc.contributor.authorSeker, Ulvi
dc.date.accessioned2024-09-29T16:11:09Z
dc.date.available2024-09-29T16:11:09Z
dc.date.issued2010
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study was carried out to investigate the effects of grain size on workpiece surface roughness and grinding forces when surface grinding AISI 1050 steel. A previously designed and constructed dynamometer was used to measure and record the forces developed during grinding. Grinding tests were carried out using different grinding wheels of different grains. Ground still ace roughness measurements were also carried out. The results showed that grain size significantly affected the grinding forces and surface roughness values. Increasing grain size and depth of cut increased the grinding forces and surface roughness values. For different grain sizes, depth of cuts of 0.01 and 0.02 mm did not result in any significant variations in the grinding forces but further increase in depth of cut led to variations of up to 50% in grinding forces. (C) 2010 Journal of Mechanical Engineering. All rights reserved.en_US
dc.identifier.endpage454en_US
dc.identifier.issn0039-2480
dc.identifier.issue7-8en_US
dc.identifier.startpage447en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8212
dc.identifier.volume56en_US
dc.identifier.wosWOS:000282421500003en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherAssoc Mechanical Engineers Technicians Sloveniaen_US
dc.relation.ispartofStrojniski Vestnik-Journal of Mechanical Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectsurface grindingen_US
dc.subjectgrinding forcesen_US
dc.subjectsurface roughnessen_US
dc.subjectgrinding wheelen_US
dc.subjectgrain sizeen_US
dc.titleAn Investigation into the Influences of Grain Size and Grinding Parameters on Surface Roughness and Grinding Forces when Grindingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu