EFFECT OF MECHANICAL ALLOYING DURATION ON TRANSVERSE RUPTURE STREGTH OF Al+10% Al2O3 COMPOSITES

Basit Öğe Kaydı
dc.contributor.authorKarabulut, Hasan
dc.contributor.authorCitak, Ramazan
dc.contributor.authorCinici, Hanifi
dc.date.accessioned2024-09-29T16:11:09Z
dc.date.available2024-09-29T16:11:09Z
dc.date.issued2013
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, Al +% 10Al(2)O(3) composites produced by mechanical alloying (MA) method, transverse rupture strengths (TRS) includes determination of the characteristics. For this purpose, Al and Al2O3 powders was carried out to mechanical alloying process for 2, 4, 6, 8 and 10 hours. Size of the powder and SEM analyses of particles were done. Powders were pressed under 700 MPa pressure in one direction. The samples were sintered at 600 degrees C in flowing Ar atmosphere for one hour. Then, hardness, density, porosity and transverse rupture strengths (TRS) of sintered composites were determined. As a result of the experimental studies, it was determined that powder dimension was decreased with increased the duration of MA. It has also been determined that mechanical alloyed samples had lower density but also high hardness and TRS.en_US
dc.identifier.endpage643en_US
dc.identifier.issn1300-1884
dc.identifier.issn1304-4915
dc.identifier.issue3en_US
dc.identifier.startpage635en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8214
dc.identifier.volume28en_US
dc.identifier.wosWOS:000325158900021en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isotren_US
dc.publisherGazi Univ, Fac Engineering Architectureen_US
dc.relation.ispartofJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMechanical alloyingen_US
dc.subjectcompositeen_US
dc.subjecttransverse rupture strengthsen_US
dc.subjectAl2O3en_US
dc.titleEFFECT OF MECHANICAL ALLOYING DURATION ON TRANSVERSE RUPTURE STREGTH OF Al+10% Al2O3 COMPOSITESen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu