Examination of tribological behaviours of aged Cu-Be alloys
Küçük Resim Yok
Tarih
2007
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Natl Acad Sciences Ukraine, Inst Metal Physics
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this examination, characteristics of wear of Cu-Be alloys are studied after application of thermal treatment of ageing to Cu-Be alloys. Cu-Be alloys were taken into solution at 820 degrees C before process of ageing and allowed for 30 min at this temperature. After fast cooling, they were aged at 400-450-500-550 degrees C for 120 min. Characteristics of a microstructure of Cu-Be alloys were determined according to analysis by a scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDS) of these alloys, which have undergone to thermal treatment of ageing, but not to process of ageing. Cu-Be alloys aged at various temperatures were then corroded using pin-on-disc wear device, and thereby their characteristics of wear were examined. In wear tests, four different loads including 20-30-40-50 N and four different distances of slip including 250-500-1000-2000 m were used. As a result of such tests, it has been determined that the wear resistance of Cu-Be alloys has decreased rapidly with increase of wearing force. It was also observed that wearing losses were increased linearly depending on a distance. Worn quantities of the materials subjected to treatment of ageing especially at temperatures above 450 degrees C were increased rapidly during ageing.
Açıklama
Anahtar Kelimeler
Cu-Be alloys, wearing, ageing treatment
Kaynak
Metallofizika I Noveishie Tekhnologii
WoS Q Değeri
Q4
Scopus Q Değeri
Cilt
29
Sayı
12
