Effect of solidification rate on corrosion resistance of cast al-10mg2si in-situ composites

Basit Öğe Kaydı
dc.contributor.authorZengın, Hüseyın
dc.date.accessioned2024-09-29T16:30:38Z
dc.date.available2024-09-29T16:30:38Z
dc.date.issued2019
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe hypoeutectic Al-10Mg2Si (wt%) composites, also denoted as Al-6.3Mg-3.7Si (wt%) alloy, were cast in asteel step mould, in which different solidification rates were obtained. The microstructural characterizations weremade by optical microscope and XRD. Corrosion performances were measured by immersion and electrochemicalcorrosion tests in 3.5% NaCl solution. Microstructure analysis showed that all the alloys consisted of ?-Al, Chinesescript type Mg2Si and needle-like Al5FeSi phases. Increasing solidification rate resulted in a remarkable refinementof Chinese script-like eutectic Mg2Si phases. Corrosion tests revealed that increasing solidification rate improvedthe corrosion resistance of Al-10Mg2Si composites due to the more uniform distribution of Mg2Si phases and thestabilization of protective oxide films on the sample surface.en_US
dc.identifier.doi10.28948/ngumuh.598092
dc.identifier.endpage1152en_US
dc.identifier.issue2en_US
dc.identifier.startpage1143en_US
dc.identifier.trdizinid354307en_US
dc.identifier.urihttps://doi.org/10.28948/ngumuh.598092
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/354307
dc.identifier.urihttps://hdl.handle.net/20.500.14619/10755
dc.identifier.volume8en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.institutionauthorZengın, Hüseyın
dc.language.isoenen_US
dc.relation.ispartofNiğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleEffect of solidification rate on corrosion resistance of cast al-10mg2si in-situ compositesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu