EFFECT OF ADHESIVE TYPE ON THE BENDING MOMENT CAPACITY OF MITER FRAME CORNER JOINTS

Basit Öğe Kaydı
dc.authoridKilic, Murat/0000-0001-6113-8634
dc.authoridALTUN, Suat/0000-0002-7080-7489
dc.contributor.authorAltun, Suat
dc.contributor.authorBurdurlu, Erol
dc.contributor.authorKilic, Murat
dc.date.accessioned2024-09-29T16:11:15Z
dc.date.available2024-09-29T16:11:15Z
dc.date.issued2010
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe bending moment capacity was studied under the diagonal tensile and compression loadings of miter corner joints with dovetail fitting in frames made with medium density fiberboard (MDF). The influence of the type of adhesive in the joints with dovetail fitting on bending moment capacity under diagonal tensile and compression loading were considered, and the joints without adhesive were compared. A total of 80 each miter frame corner joint specimens with dovetail fitting were made. Polyvinyl acetate (PVAc), polyurethane (PU), and cyanoacrylate (CA) adhesives were used, and 20 specimens were prepared without adhesive (WA) with dovetail fitting. MDF was used as a frame material, as in normal practice. The specimens were subjected to diagonal tensile and compression loadings in accordance with ASTM-D 143-94. The data were analyzed statistically. The highest bending moment capacity under diagonal tensile loading (46.09 Nm) was obtained in the specimens bonded with CA adhesive and the highest bending moment capacity under diagonal compression loading (72.04 Nm) was obtained in the specimens glued with PVAc adhesive. Other than this, since there is no difference between these and the unbonded joints, the PU adhesive was not effective in increasing the bending moment capacity under diagonal tensile loading, and the PU and CA adhesives were not effective in increasing the bending moment capacity under diagonal compression loadings.en_US
dc.identifier.endpage1483en_US
dc.identifier.issn1930-2126
dc.identifier.issue3en_US
dc.identifier.startpage1473en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8299
dc.identifier.volume5en_US
dc.identifier.wosWOS:000282008700014en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAdhesives for wooden_US
dc.subjectCyanoacrylateen_US
dc.subjectPolyurethaneen_US
dc.subjectJoint designen_US
dc.subjectFrame corner jointsen_US
dc.subjectFurniture fittingsen_US
dc.titleEFFECT OF ADHESIVE TYPE ON THE BENDING MOMENT CAPACITY OF MITER FRAME CORNER JOINTSen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu