Joining of pressure vessel steels using MAG welding method and investigation of mechanical properties

dc.contributor.authorYalcin, Ferhat
dc.contributor.authorYildirim, Mehmet Serkan
dc.contributor.authorKaya, Yakup
dc.date.accessioned2024-09-29T16:06:50Z
dc.date.available2024-09-29T16:06:50Z
dc.date.issued2024
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, P265GH and P355NH steels, which are mostly used in pressure vessel production, were joined by MAG welding. Visual (VT), radiographic (RT) and ultrasonic (UT) examinations, as well as optical microscope, microhardness, tensile, notch impact and bending examinations were carried out in the welding areas of the obtained joints. No errors out of tolerance were detected in visual inspection practices. In addition, no discontinuity was detected in the welded samples during radiographic and ultrasonic examinations. In the microstructural examinations, the formation of large and columnar-shaped weld metal grains oriented in the direction of heat flow was observed. In addition, in the microhardness measurements, the highest hardness value was obtained in the weld metal, followed by HAZ and the main material, respectively. In all tensile tests, ductile necking and rupture occurred from the main material. In the notch impact tests performed, it was determined that the impact toughness value of the HAZ region was higher than that of the weld metal. In bending tests, no visible defects were detected in the welded samples.en_US
dc.identifier.doi10.2339/politeknik.1385257
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.urihttps://doi.org/10.2339/politeknik.1385257
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7071
dc.identifier.wosWOS:001195687600001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherGazi Univen_US
dc.relation.ispartofJournal of Polytechnic-Politeknik Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectP265GHen_US
dc.subjectP355NHen_US
dc.subjectMAG weldingen_US
dc.titleJoining of pressure vessel steels using MAG welding method and investigation of mechanical propertiesen_US
dc.typeArticleen_US

Dosyalar