Investigation of Wear Performance of Different Amount SiC Reinforcements A356 Matrix Composite Materials Produced by Semi-Solid Process Method

Basit Öğe Kaydı
dc.authoridSimsek, Ijlal/0000-0001-6542-8567
dc.contributor.authorSimsek, Ijlal
dc.contributor.authorSimsek, Dogan
dc.contributor.authorOzyurek, Dursun
dc.date.accessioned2024-09-29T16:11:40Z
dc.date.available2024-09-29T16:11:40Z
dc.date.issued2020
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the wear performance of A356 matrix composite materials produced by different amount SiC reinforcement semisolid moulding method was investigated. In the A356 matrix, was added four different amounts (5%, 10, 15 and 20) SiC. Composite powders mixed without ball (30 minutes) in the vibrating type mill were cold pressed (800 MPa) and green compacts were produced. The produced green compacts, in 550 degrees C mold temperature and in 600 degrees C furnace temperature, 100 MPa pressing force was pressed for 1 minute. Produced samples were characterized with microstructure, hardness and sphericity ratio. The wear tests were performed using a pin on-disk type wear testing device with 0.2 ms(-1) sliding speed, under two different loads (30 and 60 N) and at four different sliding distances (500 m, 1000, 1500 and 2000). As a result of the studies, the hardness increases with increasing amount of SiC in the composite material, while the sphericity rates decrease. As a result of the wear tests, while the highest weight loss, 5% SiC was obtained, the lowest weight loss was obtained in 20% SiC additional composite materials.en_US
dc.identifier.endpage1243en_US
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.issue4en_US
dc.identifier.startpage1237en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8617
dc.identifier.volume23en_US
dc.identifier.wosWOS:000581901200031en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isotren_US
dc.publisherGazi Univen_US
dc.relation.ispartofJournal of Polytechnic-Politeknik Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectA356-SiC compositeen_US
dc.subjectwearen_US
dc.subjectfriction coefficienten_US
dc.subjectsemi-solid mouldingen_US
dc.titleInvestigation of Wear Performance of Different Amount SiC Reinforcements A356 Matrix Composite Materials Produced by Semi-Solid Process Methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu

We collect and process your personal information for the following purposes: Authentication, Preferences, Acknowledgement and Statistics.
To learn more, please read our privacy policy.

Customize