Co-pyrolysis of waste polyolefins with waste motor oil

Basit Öğe Kaydı
dc.authoridUcar, Suat/0000-0002-4677-3717
dc.contributor.authorUcar, Suat
dc.contributor.authorOzkan, Ahmet R.
dc.contributor.authorKaragoz, Selhan
dc.date.accessioned2024-09-29T15:57:23Z
dc.date.available2024-09-29T15:57:23Z
dc.date.issued2016
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe co-pyrolysis of waste polyolefins [waste polyethylene (PE) and waste polypropylene (PP)] with waste motor oil (WMO) was performed at different ratios under a nitrogen atmosphere at 500 degrees C. The effects of WMO on the pyrolysis of waste polyolefins and their blends were investigated under identical conditions. The addition of WMO into waste polyolefins not only increased the liquid yields but also improved the properties of liquid products. In the most cases, the co-pyrolysis process had a positive synergistic effect on the liquid yields when compared with the calculated co-pyrolysis yields. The naphtha and paraffinic contents of the liquid products obtained from the co-pyrolysis of PE/WMO, PE/PP/WMO blends were higher than liquid products obtained from the pyrolysis of the individual waste polyolefins. The trace elements as well as heavy metals in the liquid products from the pyrolysis of WMO alone or the co-pyrolysis of waste polyolefins with WMO were observed to be lower than the WMO feed. The prominent gas products obtained from the pyrolysis of individual waste polyolefins and WMO or the co-pyrolysis of waste polyolefins/WMO blends were hydrocarbons and hydrogen. The heating values of the pyrolysis and co-pyrolysis gases were found to be in the range of 27.6-32.4 MJ Nm(-3). (C) 2016 Elsevier B.V. All rights reserved.en_US
dc.description.sponsorshipDokuz Eylul University [2015-KB FEN-017]en_US
dc.description.sponsorshipThis study was supported by Dokuz Eylul University under the contract 2015-KB FEN-017.en_US
dc.identifier.doi10.1016/j.jaap.2016.01.013
dc.identifier.endpage241en_US
dc.identifier.issn0165-2370
dc.identifier.issn1873-250X
dc.identifier.scopus2-s2.0-84962291097en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage233en_US
dc.identifier.urihttps://doi.org/10.1016/j.jaap.2016.01.013
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4788
dc.identifier.volume119en_US
dc.identifier.wosWOS:000376711000028en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Science Bven_US
dc.relation.ispartofJournal of Analytical and Applied Pyrolysisen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWaste polyolefinen_US
dc.subjectWaste motor oilen_US
dc.subjectLiquid fuelen_US
dc.subjectCo-pyrolysisen_US
dc.titleCo-pyrolysis of waste polyolefins with waste motor oilen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu