CFD ANALYSIS OF LAMINAR FORCED CONVECTIVE HEAT TRANSFER FOR TiO2/WATER NANOFLUID IN A SEMI-CIRCULAR CROSS-SECTIONED MICRO-CHANNEL

Basit Öğe Kaydı
dc.authoridKaya, Huseyin/0000-0003-0575-0161
dc.authoridEkiciler, Recep/0000-0003-1367-9465
dc.authoridARSLAN, Kamil/0000-0002-1216-6812
dc.contributor.authorKaya, H.
dc.contributor.authorEkiciler, R.
dc.contributor.authorArslan, K.
dc.date.accessioned2024-09-29T16:06:37Z
dc.date.available2024-09-29T16:06:37Z
dc.date.issued2019
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, forced convection flow and heat transfer characteristics of TiO2/water nanofluid flow with different nanoparticle volume fractions (1.0%, 2.0%, 3.0% and 4.0%) in semi - circular cross - sectioned micro - channel was numerically investigated. The three - dimensional study was conducted under steady state laminar flow condition where Reynolds number changing from 100 to 1000. CFD model has been generated by using ANSYS FLUENT 15.0 software based on finite volume method. The flow was under hydrodynamically and thermally developing flow condition. Uniform surface heat flux boundary condition was applied at the bottom surface of the micro - channel. The average and local Nusselt number and Darcy friction factor values were obtained using numerical results. Also, the effects of using nanofluid on local values of Nusselt number and Darcy friction factor were investigated. Numerical results indicate that the increasing of nanoparticle volume fraction of nanofluid, the average Nusselt number increases; however, there is no significant variation in average Darcy friction factor.en_US
dc.identifier.doi10.18186/thermal.540043
dc.identifier.endpage137en_US
dc.identifier.issn2148-7847
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85083210561en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage123en_US
dc.identifier.urihttps://doi.org/10.18186/thermal.540043
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6923
dc.identifier.volume5en_US
dc.identifier.wosWOS:000461154100003en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherYildiz Technical Univen_US
dc.relation.ispartofJournal of Thermal Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCFDen_US
dc.subjectSemi-Circular Cross-Sectioned Micro-Channelen_US
dc.subjectForced Convectionen_US
dc.subjectNanofluiden_US
dc.titleCFD ANALYSIS OF LAMINAR FORCED CONVECTIVE HEAT TRANSFER FOR TiO2/WATER NANOFLUID IN A SEMI-CIRCULAR CROSS-SECTIONED MICRO-CHANNELen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu