INFLUENCE OF PUNCH SHAPES ON FORCES AND PART QUALITY IN THE PUNCHING OF EXPLOSIVELY WELDED DP600, A11100, AND DP600-A11100 COMPOSITE PLATES

Basit Öğe Kaydı
dc.authoriddemir, BILGE/0000-0002-3617-9749
dc.contributor.authorAli, Khalil Belras
dc.contributor.authorDemir, Bilge
dc.contributor.authorGurun, Hakan
dc.contributor.authorAcarer, Mustafa
dc.date.accessioned2024-09-29T16:06:40Z
dc.date.available2024-09-29T16:06:40Z
dc.date.issued2022
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study theoretically and experimentally investigates blanking/piercing operations of explosively welded commercial DP600 advanced steel sheets, Al1100 aluminium sheets, and DP600-Al1100 composite plates, in which punches with different tip shapes are used. The experimental studies included several methods, such as explosive welding, punching, tensile testing, and macro image analyses using digital, optical, and SEM microscopes. The theoretical studies comprised finite element modelling using 3D models. The explosive weld was successfully applied, and the obtained Fe-Al weld microstructure was evaluated. A total of five punches, which have different tip shapes -flat-ended (0??), angled (16??), concave (R1 and R2), and V-shaped (V16) tips -were used in the experiments. Blanking forces were obtained using a load cell mounted to the die, a data acquisition card, an amplifier, and computer software. The simulation and the experimental study results were in agreement and clearly showed the effects of the punch shear angle and shape on the forces required for blanking/piercing.en_US
dc.identifier.doi10.21278/TOF.462039222
dc.identifier.endpage68en_US
dc.identifier.issn1333-1124
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85135687848en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage55en_US
dc.identifier.urihttps://doi.org/10.21278/TOF.462039222
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6981
dc.identifier.volume46en_US
dc.identifier.wosWOS:000825319200001en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherUniv Zagreb Fac Mechanical Engineering & Naval Architectureen_US
dc.relation.ispartofTransactions of Famenaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectsheet metal formabilityen_US
dc.subjectsteelen_US
dc.subjectblanking forceen_US
dc.subjectedge qualityen_US
dc.subjectpunch type and angleen_US
dc.subjectDP600-Al1100 composite plateen_US
dc.titleINFLUENCE OF PUNCH SHAPES ON FORCES AND PART QUALITY IN THE PUNCHING OF EXPLOSIVELY WELDED DP600, A11100, AND DP600-A11100 COMPOSITE PLATESen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu