EFFECTS OF FACTORS ON DIRECT SCREW WITHDRAWAL RESISTANCE IN MEDIUM DENSITY FIBERBOARD AND PARTICLE-BOARD

Basit Öğe Kaydı
dc.authoridTor, Onder/0000-0002-9405-1081
dc.authoridyorur, huseyin/0000-0003-3357-0010
dc.contributor.authorYorur, Huseyin
dc.contributor.authorBirinci, Emre
dc.contributor.authorGunay, M. Nuri
dc.contributor.authorTor, Onder
dc.date.accessioned2024-09-29T16:08:26Z
dc.date.available2024-09-29T16:08:26Z
dc.date.issued2020
dc.departmentKarabük Üniversitesien_US
dc.description.abstractAn increase in demand on solid wood that is insufficient supply to meet in the world necessarily directed to other engineering materials that could be an alternative to the solid wood. In this context, instead of using solid wood in furniture and construction industry, wood-based panels such as medium density fiberboard (MDF) and particleboard (PB) have become widely used as construction material. Limited research has been done in the field of fastener performance as mechanical properties with different parameters in the joints constructed with these panels. Therefore, in this study. the parameters of screw type, pilot hole, screw orientation, water treatment and adhesives were investigated in MDF and PB. The results indicated that the highest direct screw withdrawal (DSW) resistance was observed in the test blocks applied with PU and the lowest DSW resistance was in the test blocks without a pilot hole drilled in both materials. In addition, MDF in general had better DSW resistance than PB in almost all combinations of the parameters. The treatment of water into MDF and PB test blocks negatively affects the DSW resistance. The DSW resistance in the face orientation was found to be higher than the corresponding ones in the side orientation in both materials.en_US
dc.identifier.doi10.4067/S0718-221X2020005000311
dc.identifier.endpage384en_US
dc.identifier.issn0717-3644
dc.identifier.issn0718-221X
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85091724125en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage375en_US
dc.identifier.urihttps://doi.org/10.4067/S0718-221X2020005000311
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7536
dc.identifier.volume22en_US
dc.identifier.wosWOS:000545887700011en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherUniv Bio-Bioen_US
dc.relation.ispartofMaderas-Ciencia Y Tecnologiaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAdhesivesen_US
dc.subjectdensityen_US
dc.subjectmedium density fiberboarden_US
dc.subjectparticleboarden_US
dc.subjectscrewen_US
dc.subjectwaier treatmenten_US
dc.titleEFFECTS OF FACTORS ON DIRECT SCREW WITHDRAWAL RESISTANCE IN MEDIUM DENSITY FIBERBOARD AND PARTICLE-BOARDen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu