Metallurgical and corrosion properties of explosively welded Ti6Al4V/low carbon steel clad

Basit Öğe Kaydı
dc.contributor.authorKahraman, N.
dc.contributor.authorGülenc, B.
dc.date.accessioned2024-09-29T16:22:25Z
dc.date.available2024-09-29T16:22:25Z
dc.date.issued2005
dc.departmentKarabük Üniversitesien_US
dc.description.abstractTitanium alloy (Ti6Al4V) and low carbon steel (LCS) were joined by explosive welding method using different ratios of explosive. Some metallurgical properties of joined samples were investigated. Joined samples were examined by means of optical microscope, scanning electron microscope (SEM) and tensile-shearing tests. Bending, tensile, hardness and corrosion behaviour of the samples were investigated. Separation was not occurred on the joining interface after tensile-shearing and bending tests. It is seen that hardness of both plates were increased with increasing explosive. It is found that increasing explosive ratio leads to an increase in corrosion. It is also found that corrosion rate was high at the beginning of the experiment but the rate of the corrosion decreased subsequently during the experiment.en_US
dc.identifier.endpage748en_US
dc.identifier.issn1005-0302
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-26944473613en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage743en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/10052
dc.identifier.volume21en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofJournal of Materials Science and Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCorrosionen_US
dc.subjectExplosive weldingen_US
dc.subjectJoiningen_US
dc.subjectLow carbon steelen_US
dc.subjectTi6Al4Ven_US
dc.titleMetallurgical and corrosion properties of explosively welded Ti6Al4V/low carbon steel claden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu