Microstructural, Mechanical, and Tribological Properties of Mg-3Al-1Sn-1Nd-Mn Alloy

Basit Öğe Kaydı
dc.authoridKARA, ISMAIL HAKKI/0000-0001-8425-5649
dc.contributor.authorKara, Ismail Hakki
dc.contributor.authorIncesu, Alper
dc.date.accessioned2024-09-29T15:51:30Z
dc.date.available2024-09-29T15:51:30Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, Mg-3Al-1Sn-1Nd-Mn alloy was produced by low-pressure die casting method and homogenization heat treated (HHT) at 400 degrees C for 16 hrs. Microstructural characterization of the alloy was done by XRF, XRD, LOM and SEM-EDS analyses. The microstructure of the alloy was composed of alpha-Mg, Al2Nd and Al11Nd3 phases. Hot rolling was applied to the HHT alloy at two different speeds 13.78 rpm [low speed rolling (LSR)] and 26.96 rpm [high-speed rolling (HSR)] at 350 degrees C. Microstructural changes were also carried out by LOM and SEM analyses. Mechanical properties (hardness and tensile properties) and wear performances of HHT, LSR and HSR samples were compared. SEM fractography was conducted on tension test samples to visualize the deformation and fracture behaviors. Also, worn surfaces of samples were investigated by SEM-EDS analysis. Abrasive, oxidation and delamination mechanisms were observed for worn surfaces of samples. To sum up, the mechanical properties of the HSR sample were higher compared to the HHT and LSR samples, and the wear rate was lower than HHT and LSR samples.en_US
dc.identifier.doi10.1007/s11665-021-05463-3
dc.identifier.endpage1682en_US
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85099985808en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1674en_US
dc.identifier.urihttps://doi.org/10.1007/s11665-021-05463-3
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4108
dc.identifier.volume30en_US
dc.identifier.wosWOS:000612708400001en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Materials Engineering and Performanceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjecthot rollingen_US
dc.subjectmagnesium alloysen_US
dc.subjectMg-Al-Sn-Nd-Mnen_US
dc.subjectneodymiumen_US
dc.subjectwearen_US
dc.titleMicrostructural, Mechanical, and Tribological Properties of Mg-3Al-1Sn-1Nd-Mn Alloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu