An investigation of cutting speed effects on geometric tolerances in turning of AA 7075 aluminum alloy

Basit Öğe Kaydı
dc.contributor.authorBozkurt, S.
dc.contributor.authorTekaüt, I.
dc.contributor.authorDemir, H.
dc.contributor.authorSeker, U.
dc.date.accessioned2024-09-29T16:21:02Z
dc.date.available2024-09-29T16:21:02Z
dc.date.issued2018
dc.departmentKarabük Üniversitesien_US
dc.description10th International Conference Machine and Industrial Design in Mechanical Engineering, KOD 2018 -- 6 June 2018 through 8 June 2018 -- Novi Sad -- 138633en_US
dc.description.abstractThe main purpose is to produce the machine parts within the defined geometric limits for performing their functions where they are assembled. Production between the tolerance values stated in the technical drawing is very important for rapid assemblying of the shaft-hub connections working with the longevity of the moving mechanisms accurately. Because, production of machine parts at geometric tolerances is required in order to minimize the error-free assembly and undesirable conditions (heating, vibration, wear etc.). For this purpose, AA 7075 T651 aluminum alloy, which is frequently used in aviation, defense, automotive industry where desired geometric tolerance values are so important, is used as workpiece. It was machined by four different coating speeds (100, 200, 300 and 400 m/min), 0.1 mm / 0.5, 1.5 and 3 mm cut depths. The effects of cutting speed on geometric tolerances (cylindricality, circularity, linearity) after processing were investigated. It was observed that the increase of cutting speed is an effective parameter for increasing or decreasing the geometric tolerance values obtained. Increasing cutting speed was resulted in increase of tool vibration, and so increased vibration led to an increase in geometric tolerance values. © 2018 Institute of Physics Publishing. All rights reserved.en_US
dc.identifier.doi10.1088/1757-899X/393/1/012104
dc.identifier.issn1757-8981
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85051848859en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.urihttps://doi.org/10.1088/1757-899X/393/1/012104
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9494
dc.identifier.volume393en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherInstitute of Physics Publishingen_US
dc.relation.ispartofIOP Conference Series: Materials Science and Engineeringen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAutomotive industryen_US
dc.subjectCuttingen_US
dc.subjectFits and tolerancesen_US
dc.subjectGeometryen_US
dc.subjectMachineryen_US
dc.subjectProduct designen_US
dc.subjectSpeeden_US
dc.subject7075 aluminum alloyen_US
dc.subject7075-T651 aluminum alloysen_US
dc.subjectEffective parametersen_US
dc.subjectGeometric toleranceen_US
dc.subjectMoving mechanismsen_US
dc.subjectTechnical drawingen_US
dc.subjectTolerance valuesen_US
dc.subjectTool vibrationsen_US
dc.subjectAluminum alloysen_US
dc.titleAn investigation of cutting speed effects on geometric tolerances in turning of AA 7075 aluminum alloyen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu