Optimization of Cutting Parameters Affecting Surface Roughness in Turning of Inconel 625 Superalloy by Cryogenically Treated Tungsten Carbide Inserts

Basit Öğe Kaydı
dc.authoridDEMIR, Halil/0000-0002-9802-083X
dc.authoridAKGUN, Mahir/0000-0002-4522-066X
dc.contributor.authorAkgun, Mahir
dc.contributor.authorDemir, Halil
dc.date.accessioned2024-09-29T15:54:53Z
dc.date.available2024-09-29T15:54:53Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis work focuses on developing the mathematical model of surface roughness (Ra) in the turning of Inconel 625 superalloy with cryogenically treated tungsten carbide inserts. The influence of cryogenic treated on the microstructure and hardness of tungsten carbide tools was also investigated for the as-received inserts and deep cryogenic treatment at - 196 degrees C for 12, 24, and 36 h conditions. Turning experiments have been performed according to an orthogonal array L16 with three parameters (cutting tool, feed rate, cutting speed) at different levels with a 1 mm depth of cut. The ideal cutting tool and cutting parameters were evaluated in terms of the surface roughness (Ra). Analysis of Variance has been applied to determine the percentage of each cutting factor. It has been observed that the cutting speed has a maximum with 66.28% contribution on Ra. The best optimal turning parameters are obtained as A3B3C1 according to S/N ration. The mathematical model of Ra has been developed by regression analysis. The developed model is tested with verification experiments and found to be in good agreement with the experimental results.en_US
dc.description.sponsorshipScientific and Technological Research Council of Turkey (TuBTAK) [119M785]en_US
dc.description.sponsorshipThe authors would like to thank the Scientific and Technological Research Council of Turkey (TuBTAK) for the financial support with project number 119M785.en_US
dc.identifier.doi10.1007/s42452-021-04303-2
dc.identifier.issn2523-3963
dc.identifier.issn2523-3971
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85100771540en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s42452-021-04303-2
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4326
dc.identifier.volume3en_US
dc.identifier.wosWOS:000617915900017en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer International Publishing Agen_US
dc.relation.ispartofSn Applied Sciencesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectMachiningen_US
dc.subjectCryogenic treatmenten_US
dc.subjectSurface roughnessen_US
dc.subjectTaguchi methoden_US
dc.titleOptimization of Cutting Parameters Affecting Surface Roughness in Turning of Inconel 625 Superalloy by Cryogenically Treated Tungsten Carbide Insertsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu